TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

International 606 info

Welcome Guest, Log in or Register

Author

R. Brow

09-04-2003 17:17:37

Report to Moderator

We have a 606 that we have been using for 3 years now planting wildlife crops. Been having problems with the pto slipping( even after adjusting) and the hydrolics seem to get sluggish after 2-3 hours of running. Does this system take a special hydro oil?
I believe we are just using tractor hydralic fluid presently.
Thanks,
R.Brow

[Log in to Reply] [No Email]

Jay

09-04-2003 18:19:01

Report to Moderator

Re: International 606 info in reply to R. Brow, 09-04-2003 17:17:37

Per my Chek-Chart book:

HTF - which basically means Hy-Tran, Mobil 424 Fluid, Chevron 1000 Fluid, Exxon Hydro 560, etc. (These are the ones I'm familiar with and all quality products)

Per book: To drain, remove 3 plugs at bottom and 1 at top right. Models without power take-off and torque amplifier have 2 plugs at bottom and 1 at top right. When refilling (52 quarts by the book), leave filler plug out, then move position control and auxilliary valve control levers back and forth 10 to 12 times and return position and auxilliary valve levers to forward position. Actuate auxilliary valve control levers to retract remote cylinders. With power steering turn wheel to both extremes and return to center. Stop engin and add additional fluid as required and install filler plug. Drain and refill every 1000 hours or yearly.

[Log in to Reply] [No Email]

R. Brow

09-04-2003 19:34:04

Report to Moderator

Re: Re: International 606 info in reply to Jay, 09-04-2003 18:19:01

Thanks guys, you've been alot of help!
We are heading to the deer camp tommorow, I'll pick up some new hyd. filter and fluid and do the change. Very informative site for a part time farmer like myself, enjoyed reading the other posts about the 606. Have a great year!! Roger, Central Mich.

[Log in to Reply] [No Email]

Red Dave

09-04-2003 17:41:49

Report to Moderator

Re: International 606 info in reply to R. Brow, 09-04-2003 17:17:37

It should use Case/IH Hytran hydraulic oil. Some of the guys on the Farmall/IH board can probably give you some more detailed help.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy