TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

1961 Ford 841 diesel Industrial with 4wd kit load

Welcome Guest, Log in or Register

Author

Mark Williams

07-01-2003 07:25:09

Report to Moderator

I would like to get some information about this tractor in order to make a decision to buy it.
The tractor is in working condition except the drive shaft for the front wheel kit has been removed for dry pavement use(I guess there is a problem with the gear ratio's so they recommend removing the drive shaft for use on dry ground.) Anyway the owner has never used the 4wd and the shaft is off. My question is should the drive spindle turn freely into the "pumpkin" for the front axle or should this be a direct link to the wheels. Also if anyone has information about the aftermarket kit and how to get information about parts and repairs please e-mail me back.
thanks Mark W or call 585 422-1472

[Log in to Reply] [No Email]

ATW/WA

07-03-2003 20:44:41

Report to Moderator

Re: 1961 Ford 841 diesel Industrial with 4wd kit in reply to Mark Williams, 07-01-2003 07:25:09

Mark,

Tony Jacobs, is the person you need to talk to, he has the specfic knowledge and parts source. His phone #1-413-267-5087. This time of year he is rather busy, call at a decent hour and leave contact info if he's not imediately available. Do talk to Tony, he walk you through a good check out and be able to give an approximate and/or range of $$$ to repair if anything is suspect.

HTH ATW/WA

[Log in to Reply] [No Email]

Jim.UT

07-01-2003 11:55:27

Report to Moderator

Re: 1961 Ford 841 diesel Industrial with 4wd kit in reply to Mark Williams, 07-01-2003 07:25:09

I tried to email you, but your email address was hidden.

What you probably have is an Elenco 4wd conversion kit on that tractor. The remains of the Elenco company was bought several years ago by Tony Jacobs. He hangs around the Ford board but posts infrequently. If you go to the Ford discussion board (not the Ford 9N, 2N, 8N board), and type "tony jacobs" in the archive search box, you should find some posts from him that will contain his email address. He sells replacement parts for that system and seems to be the guy who knows the most about it.

Good Luck.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy