Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

350 international utility

Welcome Guest, Log in or Register
Author 
Mike Richardson

06-22-2003 07:20:43




Report to Moderator

I have a 350 int utility with front end loader the hyd pump is on the front this is the only pump on the tractor it operates the steering, 3 point everything is this normal it keeps blowing the back seal on the pump ?




[Log in to Reply]   [No Email]
Dick

06-22-2003 13:58:22




Report to Moderator
 Re: 350 international utility in reply to Mike Richardson, 06-22-2003 07:20:43  
I am not sure what your setup is, but you might check a couple of things out. I have an H with a loader and a distributor mount hydraulic pump. My outlet on the pump is piped to a double spool for my loader controls. The double spool both bypass's and relieves back to the 5 gallon tank. Dont know if you have an external tank, but I can look in mine and see the oil returning to the tank. I had to lower my relief on the spool (factory set at 2000psi) because it did leak around a couple of the pump bolts when the loader dead headed.. Lowered it 2 complete turns (not sure of psi now) and dead headed the loader and took care of the leak. Dont know if this relates to what you have happening, but just thought it might be something to look at.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy