Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

Oil pressure/ air filter

Welcome Guest, Log in or Register
Author 
phillip

06-20-2003 06:39:21




Report to Moderator

what should the oil pressure be for an oliver 7o rowcrop 6 cyl? what wieght oil should be used for the oil bath air filter?




[Log in to Reply]   [No Email]
Clint

06-20-2003 08:18:24




Report to Moderator
 Re: oil pressure/ air filter in reply to phillip, 06-20-2003 06:39:21  
From what I'm told the Oliver gauges were only from 0 - 15 lbs. So normal operation should fall between 10 to 15 lbs. Having variables of engine wear and such. Does this sound about right?

The oil bath filter should have the same weight oil you put in the crank case. If you're using 30W crank case oil then use 30W in the filter cup.

Another good source for questions on the web is "Ask the Oliver mechanic" Larry Harsin. Near the bottom of his web page you'll find the link to ask any and all question related to Olivers. Link

[Log in to Reply]  [No Email]
phillip

06-20-2003 09:12:33




Report to Moderator
 Re: Re: oil pressure/ air filter in reply to Clint, 06-20-2003 08:18:24  
i've got 25lbs oil pressure so doing good, thanks for the help



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy