Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

MF 245 Remote Hydraulic Control Valve

Welcome Guest, Log in or Register
Author 
DAN YEHL

06-17-2007 13:48:40




Report to Moderator

I have a two-spool remote auxilary hydraulic valve that fit a 245 Massey Ferguson tractor. I no longer have the tractor and want to sell the valve, does anyone know what tractors would have the same remote hydraulic setup as this?




[Log in to Reply]   [No Email]
MF Poor

06-17-2007 15:11:07




Report to Moderator
 Re: MF 245 Remote Hydraulic Control Valve in reply to DAN YEHL, 06-17-2007 13:48:40  
If you're talking about the type that bolted directly to the top of the rear end housing, just below the seat, that'll fit just about any Massey 100 series or 200 series, and quite a few more. How much you asking? My email should be open. I'm interested.



[Log in to Reply]  [No Email]
DALE HINTHORN

06-17-2007 13:58:21




Report to Moderator
 Re: MF 245 Remote Hydraulic Control Valve in reply to DAN YEHL, 06-17-2007 13:48:40  
THEY CAN BE USED ON ANY TRACTOR EVEN OPEN OR CLOSED CENTER THERE IS A LARGE PLUG ON THE VALVE . IF ITS OPEN IT WILL HAVE AN O ON THE TOP OR IT MAY BE PLAIN IF IT HAS A CC ON IT THEN ITS CLOSED CENTER.THIS PLUG CAN BE CHANGED TO EITHER AND THE PLUG CAN BE BOUGH FROM ANY TRACTOR DEALER.



[Log in to Reply]  [No Email]
Gerald J.

06-17-2007 15:15:39




Report to Moderator
 Re: MF 245 Remote Hydraulic Control Valve in reply to DALE HINTHORN, 06-17-2007 13:58:21  
Its not necessarily true that the remote valve is universal. It is if its supply and return are hoses, but there has been a series of valves made for MF and Ford tractors that bolts down on top the rock shaft cover under the seat that taps the internal hydraulics and allows that to work normally or that hydraulic power to be diverted to one or two remotes with NO hoses or pipes between the tractor and the valve. Those valves are NOT universal.

Also not every general purpose valve can be converted to closed center. The least expensive valves can't often be converted. They have to be planned for conversion.

Your shift lock seems stuck, else you are shouting and that's not necessary in this forum.

Gerald J.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy