TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

Power steering for Farmall Super M.

Welcome Guest, Log in or Register

Author

Glenn Thoming

06-12-2007 07:03:35

Report to Moderator

I�m planning to install a Char-Lynn steering valve on my Farmall Super M. Model SM, Serial # F-32828-J.
The M has a bucket on the front and an aftermarket 3-point hitch on the rear. They both work at the same time and the hitch is power-down too. My problem is that I�m not sure how to connect the steering torque generator into the hydraulic system. There are no hoses connected to the left side of the engine. Those two points have the small round plates covering the openings. It has been suggested that the motor be connected in series with the loader control valve. The steering valve is �open center� but would it restrict the flow to the loader too much. This is my first venture into hydraulics.

[Log in to Reply] [No Email]

Wardner

06-12-2007 16:51:28

Report to Moderator

Re: Power steering for Farmall Super M. in reply to Glenn Thoming, 06-12-2007 07:03:35

You can use a separate pump from a truck, auto, or tractor. Try to use one that has a reservoir built in.

Or you can use a priority valve if you have live hydraulic power. You probably don't have live hyd power on your M. On a M that means a hyd pump ahead of your distributer or mag.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy