TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

1948 Hough Payloader

Welcome Guest, Log in or Register

Author

Tom

07-07-1998 05:14:44

Report to Moderator

My father has one, and I was thinking about trying my luck in restoring her. He wants to junk it. Any info on obtaining parts and general information on this beast would be greatly appreciated. Thanks in advance.....Tom

[Log in to Reply] [No Email]

Jim Raterman

11-24-1999 17:17:49

Report to Moderator

Re: 1948 Hough Payloader in reply to Tom, 07-07-1998 05:14:44

I have a hough hm with a bad water pump can you help me?????

[Log in to Reply] [No Email]

Robert E. Herbison

10-24-2002 21:07:02

Report to Moderator

Re: Re: 1948 Hough Payloader in reply to Jim Raterman, 11-24-1999 17:17:49

I also have a Hough Payloader HM I am trying to restore. I bought it about 4 months ago and need help on it.

I know very little about it, but need to know about the controls.

Please help if your can.

[Log in to Reply] [No Email]

Paul F. Pugh, Jr.

02-12-1999 20:44:42

Report to Moderator

Re: 1948 Hough Payloader in reply to Tom, 07-07-1998 05:14:44

: My father has one, and I was thinking about trying my luck in restoring her. He wants to junk it. Any info on obtaining parts and general information on this beast would be greatly appreciated. Thanks in advance.....Tom
Did you ever get any feedback on your inquiry? I have a Hough 4 wheel drive payloader. runs great.

[Log in to Reply] [No Email]

Ted Cooper

12-31-2000 09:43:25

Report to Moderator

Re: Re: 1948 Hough Payloader in reply to Paul F. Pugh, Jr., 02-12-1999 20:44:42

Hello, I own one of these payloaders, but I do not know very much about the machine. I hope you, or someone you could direct me to, could tell me about this machine. I think this machine is the INTERNATIONAL PAYLOADER, but i don,t know. Can you tell me how I can determine if this is a Hough or a International. Where is the serial number, or other identificationz. And where can I get parts for this machine. I purchased this payloader from a man that had this setting on his farm. The payloader ran very good, untill just lately. I believe I need some new points, rotor, cap, etc. Are these items readily easy to find? If so, where? Any information you can give me would help a lot. Thank you, Ted Coopoer

[Log in to Reply] [No Email]

rosco

03-31-2002 14:25:29

Report to Moderator

Re: Re: Re: 1948 Hough Payloader in reply to Ted Cooper, 12-31-2000 09:43:25

I own a similar Hough
I think you will find that the engine is a waukasha.

[Log in to Reply] [No Email]

Chuck

01-10-2001 21:20:03

Report to Moderator

Re: Re: Re: 1948 Hough Payloader in reply to Ted Cooper, 12-31-2000 09:43:25

Ted, I own a IHC Hough H-30 front end loader, did you ever find a site with parts. I have heard that the U-240 [gas] engine I have is a Black Diamond engine. These were used on Army trucks. I am looking for a head, manifold, exhaust gaskets. What have you found out??
I have a manual Parts and service.

[Log in to Reply] [No Email]

05-27-2002 19:29:29

Report to Moderator

Re: Re: Re: Re: 1948 Hough Payloader in reply to Chuck, 01-10-2001 21:20:03

Ihave a 1960 Hough H-50 Payloader with a 6cyl.International motor. Since International sold off their industrial end to Case I have found it very difficult to find engine parts. One resource that I have found which also advertises parts for the Waukesha engine is Mills Obsolete Engine Parts. Their website can be found at WWW.MILLSOBSOLTEEENGPARTS.COM. They might have some parts or other resources for your Black Diamond engine. Good luck.

[Log in to Reply] [No Email]

TOM MCCUNE

02-18-2002 21:10:31

Report to Moderator

Re: Re: Re: Re: 1948 Hough Payloader in reply to Chuck, 01-10-2001 21:20:03

HI I JUST FOUND THIS SIGHT THANK GOD! I JUST BOUGHT A HOUGH PAYLOADER IM NOT SURE WHAT YEAR IT IS BUT IT LOOKS LIKE A OLD FORK LIFT WITH A BUCKET ON IT CAN ANYBODY HELP ME WITH THIS? I WOULD APPRECIATE ANY FEEDBACK.THANK YOU!!!!! !!

[Log in to Reply] [No Email]

George

04-09-2002 07:34:41

Report to Moderator

Re: Re: Re: Re: Re: 1948 Hough Payloader in reply to TOM MCCUNE, 02-18-2002 21:10:31

Hey Tom, I have the same payloader as you. Here is some of the information that I have gotten off of the data plate. It was manufactured by Frank G. Hough Co. which is ( or was ) a subsidary of International Harvister. The engine is a Waukasha. My engine was converted to propane at some time, but I'm going to put it back to gas. Mine has solid tires which I am going to put rubber air tires on soon. I am trying to get another one that my friends uncle has that has a blowen engine in it so that I will have some more spare parts. If you know or have found any other web sites on these payloaders please e-mail me! I am looking for a manual for it as well. If you already have one please let me know where you got it.

[Log in to Reply] [No Email]

roy raymond

06-23-2005 16:39:09

Report to Moderator

Re: Re: Re: Re: Re: Re: 1948 Hough Payloader in reply to George, 04-09-2002 07:34:41

Have you found a manual yet? I am looking for a repair rebuid manual for the torque converter and transmison.

[Log in to Reply] [No Email]

jim gardner

02-13-1999 21:19:58

Report to Moderator

Re: Re: 1948 Hough Payloader in reply to Paul F. Pugh, Jr., 02-12-1999 20:44:42

I have recently bought a 1962 hough payloader model 70h and am searching for a tire. the tire being a 18.00 by 24 if you can help me out in finding one I would appreciate it geatly.I may have other items that may be of intrest to you

[Log in to Reply] [No Email]

Mark Hardenstine

03-21-1999 19:38:56

Report to Moderator

Re: Re: Re: 1948 Hough Payloader in reply to jim gardner, 02-13-1999 21:19:58

Jim I have 17.5 x 24 tire. Iam looking for a repair/parts book for a 1938 Hough He

[Log in to Reply] [No Email]

John J. Borucki

12-17-2000 08:30:35

Report to Moderator

Re: Re: Re: Re: 1948 Hough Payloader in reply to Mark Hardenstine, 03-21-1999 19:38:56

I have a Hough Payloader. It has a HA model tag on the dash. It also says it was made in Libertyville, Illinois. I am trying to find out information on it. The love joint for the H/Pump
keep rounding the tips off. The pump runs off of this. cane any one help me.

John J. Borucki

[Log in to Reply] [No Email]

JOE

01-14-2001 11:25:39

Report to Moderator

Re: Re: Re: Re: Re: 1948 Hough Payloader in reply to John J. Borucki, 12-17-2000 08:30:35

TRY GOING TO THIS SITE FOR PARTS AND INFO.

FP SMITH EQUIPMENT

[Log in to Reply] [No Email]

harry sanders

02-27-2000 13:46:38

Report to Moderator

Re: Re: Re: Re: 1948 Hough Payloader in reply to Mark Hardenstine, 03-21-1999 19:38:56

can you help me with any infomation on my hough
payloader modle HF serial no 81808 year tyre
size manuals etc Thanks Harry sanders

[Log in to Reply] [No Email]

ray sutter

04-13-2001 20:07:07

Report to Moderator

Re: Re: Re: Re: Re: 1948 Hough Payloader in reply to harry sanders, 02-27-2000 13:46:38

I have a HF ser# 84920. I purchased it from family who bought it new.
Info is that it is of 1950 vintage. Front tires
are 9.00X 20 10 hole lock rim wheel. Back tires
are 13.oo X 24. same wheel. Back tires are same as used on most motor graders. front steer tires are of type used on off road truck. My loader has back hoe attachment on radiator end of machine. although it will be removed. not practical.
6 cyl Hurc/ emgine GOOD machine !!

[Log in to Reply] [No Email]

shane berg

12-28-2001 20:07:08

Report to Moderator

Re: Re: Re: Re: Re: Re: 1948 Hough Payloader in reply to ray sutter, 04-13-2001 20:07:07

I have a hough Payloader. And would like to find out what year it is.It has a 6cyl Hercules and front tires like school bus. Back tires like a motorgrader. Has a rockford pto for the clutch and a 12v gen for charging. This machine is 2wd.I have ser numbers but have to get them. Hope to here from you.I live in Sabine Pass Tx.

[Log in to Reply] [No Email]

Patricia Peters

03-01-1999 18:18:08

Report to Moderator

Re: Re: Re: 1948 Hough Payloader in reply to jim gardner, 02-13-1999 21:19:58

My husband has a mid-50's Hough Payloader Model HR. Am looking for a transmission gear that is stripped of some of it's teeth. Can anyone help find one?

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy