TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Rototiller zinck

Welcome Guest, Log in or Register

Author

bill

06-02-1998 18:41:16

Report to Moderator

need parts outlet or factory address or phone

[Log in to Reply] [No Email]

Ted Ludgate

10-12-1998 23:05:01

Report to Moderator

Re: rototiller zinck in reply to bill, 06-02-1998 18:41:16

Me too. Any luck?

[Log in to Reply] [No Email]

jerry vanderoef

06-26-2000 09:41:22

Report to Moderator

Re: Re: rototiller zinck in reply to Ted Ludgate, 10-12-1998 23:05:01

: Me too. Any luck?
I have a zinck rototiller and am in need of parts.
is there a dealer in the south east that anyone knows of?

[Log in to Reply] [No Email]

Paul Laroque

07-24-2006 11:08:26

Report to Moderator

Re: Re: Re: rototiller zinck in reply to jerry vanderoef, 06-26-2000 09:41:22

does anyone know wheee I can access a set of tines s. I am in Winnipeg, Manitoba, Canada
thanks

[Log in to Reply] [No Email]

Larry Strobel

08-28-2005 14:54:27

Report to Moderator

Re: Re: Re: rototiller zinck in reply to jerry vanderoef, 06-26-2000 09:41:22

I have also just acquired a Zinck roto tiller and can't seem to get it running. Ity seems to be complete and I also have extra tines. Anyone that can help me would be appreciated.

[Log in to Reply] [No Email]

jerry vanderoef

12-12-2000 10:38:05

Report to Moderator

Re: Re: Re: rototiller zinck in reply to jerry vanderoef, 06-26-2000 09:41:22

I have found the number for gardening naturaly. They are the importers for the tiller. They do not have parts for the tiller since the company ZINK went out of buisness a few years ago. They may have a few small items like tines still in the warehouse. The number is 413-298-4272 in MASS. I am in need of a internal drive gear (plastic on a steel shaft) I was told that my only option was to have it machined. So I have a tiller that could be used for parts if anyone needs it. thanks jv

[Log in to Reply] [No Email]

Larry Strobel

08-28-2005 15:03:13

Report to Moderator

Re: Re: Re: Re: rototiller zinck in reply to jerry vanderoef, 12-12-2000 10:38:05

I have a Zinck 5hp rototiller that seems to be complete, but can't get it started. Any manual or documentation would be appreciated. I'll need to sell if I can't get it running soon.

[Log in to Reply] [No Email]

Aaron Holm

06-27-2006 16:05:43

Report to Moderator

Re: Re: Re: Re: rototiller zinck in reply to Larry Strobel, 08-28-2005 15:03:13

I noticed your posting is from last August, but I have one that the tines stopped turning on and would be interested in purchasing yours for parts if you still have it. Please contact me with a price if it is available.

[Log in to Reply] [No Email]

Evelyn Stanford

03-17-2005 12:44:27

Report to Moderator

Re: Re: Re: Re: rototiller zinck in reply to jerry vanderoef, 12-12-2000 10:38:05

I have a Zinck rototiller and need the black hard rubber things the tiller slides on to stop and start the tines turning. Can anyone help me ? Evelyn

[Log in to Reply] [No Email]

peter crone

07-23-2005 10:43:29

Report to Moderator

Re: Re: Re: Re: rototiller zinck in reply to Evelyn Stanford, 03-17-2005 12:44:27

TO EVELYN STANFORD:

If you still have your Zinck tiller, would you be interested in selling it? The inventor, Eugen (Eugene) Zinck died many years ago but his son, Wolf, lives nearby where Eugen lived, which was Bad Kreuznach, near Frankfort.

I visited him several times, but we never got anything off the ground. Remarkable man. I am in Florida.

[Log in to Reply] [No Email]

John Stuart

01-01-2006 12:24:39

Report to Moderator

Re: Re: Re: Re: rototiller zinck in reply to peter crone, 07-23-2005 10:43:29

I have a Gardener Rototiller in working condition. I'd be interesting is selling it. Contact via e-mail for details.

[Log in to Reply] [No Email]

George Perna

05-06-2007 08:38:55

Report to Moderator

Re: Re: Re: Re: rototiller zinck in reply to John Stuart, 01-01-2006 12:24:39

I am interested in buying a Zinck almost in any condition I need Parts any takers?

[Log in to Reply] [No Email]

max muster

05-11-2005 03:51:41

Report to Moderator

Re: Re: Re: Re: rototiller zinck in reply to Evelyn Stanford, 03-17-2005 12:44:27

pleas contact: MR Wolf D. ZINCK
Tel: 0049-6742-605860
he may help you!

[Log in to Reply] [No Email]

Larry Clifton

04-15-2004 19:42:31

Report to Moderator

Re: Re: Re: Re: rototiller zinck in reply to jerry vanderoef, 12-12-2000 10:38:05

I just inherited my Dad's Zinck...with several broken tines. Did anyone ever find a source for replacements? Thanks, Larry

[Log in to Reply] [No Email]

peter crone

07-23-2005 10:47:33

Report to Moderator

Re: Re: Re: Re: Re: rototiller zinck in reply to Larry Clifton, 04-15-2004 19:42:31

TO LARRY CLIFTON....

If you still have your Zinck tiller, would you be interested in selling it? The inventor, Eugen Zinck, lived and had a factory in Bad Kreuznach, near Frankfort. His son, Wolf, lives nearby. Eugen died quite a few years ago.
I live in Florida.

[Log in to Reply] [No Email]

Paul Fretz

04-21-2004 12:13:25

Report to Moderator

Re: Re: Re: Re: Re: rototiller zinck in reply to Larry Clifton, 04-15-2004 19:42:31

Did you or anyone else find a source for tines? And are you or anyone else interested in selling their Zinck tiller? Please reply here or send an email to pcfretz and use domain shalomca.com -Thanks, Paul

[Log in to Reply] [No Email]

W.D. Knicely

03-14-2005 08:02:09

Report to Moderator

Re: Re: Re: Re: Re: Re: rototiller zinck in reply to Paul Fretz, 04-21-2004 12:13:25

If any one has a Gardener Zinck rototiller for sale in any condition let me know. W.D.

[Log in to Reply] [No Email]

Charles F. Coller

02-19-2006 11:30:22

Report to Moderator

Re: Re: Re: Re: Re: Re: rototiller zinck in reply to W.D. Knicely, 03-14-2005 08:02:09

I have a Gardener Rototiller that is missing the tines otherwise it was last started about two years ago and worked fine. My father brought it brand new in Feb of 1981. I have all the paper work. The machine is in very good condition. My phone number is 417 634-3386 after 730 Pm cst.

[Log in to Reply] [No Email]

George Perna

05-08-2007 17:17:49

Report to Moderator

Re: Re: Re: Re: Re: Re: rototiller zinck in reply to Charles F. Coller, 02-19-2006 11:30:22

I am interested in buying a Zinck almost in any condition I need Parts any takers

[Log in to Reply] [No Email]

Rickey Patrick

02-29-2004 15:12:00

Report to Moderator

Re: Re: Re: Re: rototiller zinck in reply to jerry vanderoef, 12-12-2000 10:38:05

I have a working model of the Zinck Gardner, and I would like to find an owner's manuel, or any other literatrure on my machine. Please e-mail any information to jrpatrick1961@hotmail, or send to 67 Audrey Rd, Brookeland, TX 75931. Thank you.

[Log in to Reply] [No Email]

Richard Lee

05-03-2004 15:58:51

Report to Moderator

Re: Re: Re: Re: Re: rototiller zinck in reply to Rickey Patrick, 02-29-2004 15:12:00

I have an owners manual for the gardener rototiller from gardening naturally dated 1981. It is a fotocopy so the pichures did not come out so good. Do you have any spare tines that you could sell me?

[Log in to Reply] [No Email]

Jerry Hinman

07-25-2002 14:57:32

Report to Moderator

Re: Re: Re: Re: rototiller zinck in reply to jerry vanderoef, 12-12-2000 10:38:05

I am looking for tines 40410 and 40420 for the "Gardner" tiller if someone knows of a source?

[Log in to Reply] [No Email]

mackie whaley

03-28-2003 15:26:22

Report to Moderator

Re: Re: Re: Re: Re: rototiller zinck in reply to Jerry Hinman, 07-25-2002 14:57:32

I have the whole tiller with a briggs and stratton 5hp motor in very good condition and would like to sell.

[Log in to Reply] [No Email]

Robert Seidel

03-24-2004 14:41:51

Report to Moderator

Re: Re: Re: Re: Re: Re: rototiller zinck in reply to mackie whaley, 03-28-2003 15:26:22

Yes, I am intrested in your rototiller. My tiller is broken and I am looking for this model to switch out parts with.
Thanks.

[Log in to Reply] [No Email]

tinkertom

05-31-2003 06:54:51

Report to Moderator

Re: Re: Re: Re: Re: Re: rototiller zinck in reply to mackie whaley, 03-28-2003 15:26:22

have zinck gardener model works good make offer

[Log in to Reply] [No Email]

Dan Kinnaman

07-17-2003 08:01:31

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: rototiller zinck in reply to tinkertom, 05-31-2003 06:54:51

I'm looking for parts for a zinck mh tiller no:21781 please contact me if you have information. Thank you.

[Log in to Reply] [No Email]

Howard Sylve

04-12-2001 13:12:34

Report to Moderator

Re: Re: Re: Re: rototiller zinck in reply to jerry vanderoef, 12-12-2000 10:38:05

I need the guides for support rails.

[Log in to Reply] [No Email]

Randy Belice

05-20-2002 08:25:43

Report to Moderator

Re: Re: Re: Re: Re: rototiller zinck in reply to Howard Sylve, 04-12-2001 13:12:34

I am looking for the handle bar assembly if anybody has one for sale. Metal fatigue got the best of mine. Keep those mounting bolts tight to preserve the life of yours.

[Log in to Reply] [No Email]

Roxanna Rogers

07-23-2002 06:29:17

Report to Moderator

Re: Re: Re: Re: Re: Re: rototiller zinck in reply to Randy Belice, 05-20-2002 08:25:43

Looking for a gardener german made 5 hp tiller need the tines has 16 just need a couple though if anyone can help please let me know. Thanks

[Log in to Reply] [No Email]

Peter Wilson

05-12-2001 17:49:36

Report to Moderator

Re: Re: Re: Re: Re: rototiller zinck in reply to Howard Sylve, 04-12-2001 13:12:34

Which gear were you looking for? I'm in need of the large, main gear as well as the tyne shaft gear. If you still have one of these gears, or if you found a place that still sells the gears, please let me know. Thanks! Pete Wilson

[Log in to Reply] [No Email]

David Walden

03-22-2002 07:17:38

Report to Moderator

Re: Re: Re: Re: Re: Re: rototiller zinck in reply to Peter Wilson, 05-12-2001 17:49:36

I need to replace my garden tiller tines. The part numbers are 40420 and 40410. I need 4-5 pair of these. Do you know where I might locate them or a substitute? Thanks, David

[Log in to Reply] [No Email]

George Perna

04-12-2002 19:49:20

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: rototiller zinck in reply to David Walden, 03-22-2002 07:17:38

If anyone wants to sell parts or the whole tiller I would be willing to buy I need parts now and will need more in future.

[Log in to Reply] [No Email]

Tim Ridenour

07-18-2005 14:26:36

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Re: rototiller zinck in reply to George Perna, 04-12-2002 19:49:20

I am looking for the slides that go on the bottom of the motor, these help in engaging the tines when the motor is shifted forward.

[Log in to Reply] [No Email]

tinkertom

05-31-2003 06:47:06

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Re: rototiller zinck in reply to George Perna, 04-12-2002 19:49:20

have zinck model gardener ser. no. 20068 will part out or whole thing

[Log in to Reply] [No Email]

Dave Reynolds

07-19-2003 20:10:04

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Re: Re: rototiller zin in reply to tinkertom, 05-31-2003 06:47:06

I just found my brand new zinck Gardener rototiller, in shipping boxes, with invoice from Gardening Naturally dated 1981. I think I have all the parts, but don't have a manual to assemble it. HELP!!!

[Log in to Reply] [No Email]

Richard Lee

05-03-2004 16:05:47

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: rototiller in reply to Dave Reynolds, 07-19-2003 20:10:04

I have a fotocopy of the owners manual with assembly instructions. Since it is a copy the pictures cannot be seen with clarity. Also do you have any spare tines for sale? The instructions state you should have three boxes to have all parts.

[Log in to Reply] [No Email]

Larry Strobel

08-28-2005 14:56:00

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: rototi in reply to Richard Lee, 05-03-2004 16:05:47

Can I get a copy of the manual?

[Log in to Reply] [No Email]

James Rutherford

03-28-2004 14:29:23

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: rototiller in reply to Dave Reynolds, 07-19-2003 20:10:04

I am looking for the large gear for the Zinck Gardner rototiller.

[Log in to Reply] [No Email]

mackie whaley

03-28-2003 15:28:36

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Re: rototiller zinck in reply to George Perna, 04-12-2002 19:49:20

please contact me at 334-678-9921

[Log in to Reply] [No Email]

Kim Caple

06-11-1999 13:31:36

Report to Moderator

Re: Re: rototiller zinck in reply to Ted Ludgate, 10-12-1998 23:05:01

Me too, specifically I'm looking to purchase right and left replacement tines, any luck?
Thanx!

[Log in to Reply] [No Email]

chris

04-29-2000 13:54:15

Report to Moderator

Re: Re: Re: rototiller zinck in reply to Kim Caple, 06-11-1999 13:31:36

have a zinck gardener,front tine axel came apart,
lost three tines and am not having any luck findingreplacements,if you are still looking,i may be interested in salvaging the engine and disposing of the gearbox/frame/tines/etc.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy