Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Massey Harris & Massey Ferguson Tractors Discussion Forum
:

EXTERNAL HYDRALICS FOR TO 30

Welcome Guest, Log in or Register
Author 
CHRIS GENTILE

01-12-2005 16:44:53




Report to Moderator

i HAVE A TO 30 QND WOULD LIKE TO USE A HYDRALIC FENCE POST DRIVER THAT REQUIRES 1800 PSI AND 6GPM FLUID. hAS ANYONE MOUNTED A EXTERNAL HYDRALIC PUMP ON A TO 30?




[Log in to Reply]   [No Email]
marlowe

01-12-2005 18:23:23




Report to Moderator
 Re: EXTERNAL HYDRALICS FOR TO 30 in reply to CHRIS GENTILE, 01-12-2005 16:44:53  
you can run them off the front of the crank shaft but it's a lot of work to made brackets best is to run a pump off the PTO i have one set up that way and use a remote valve [two way] use the oil from the tractor rear end just drilled and taped some ports



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy