Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

John Deere Tractors Discussion Forum
:

4020 Draft control

Welcome Guest, Log in or Register
Author 
Kemper

11-12-2007 15:46:41




Report to Moderator

I have a service manual on the way for my 4020,but i need some advice on my draft control,i can only raise the 3 point when the draft control lever is in the bottom slot,if i move it up into the other 2 settings it will not raise at all,is there something i can be checking before my manual gets here? I tried plowing with it today and figured out it wasen't working.Thanks in advance for any help.

[Log in to Reply]   [No Email]
mattd

11-12-2007 17:49:50




Report to Moderator
 Re: 4020 Draft control in reply to Kemper, 11-12-2007 15:46:41  
your draft linkage is probably out of adjustment and worn out. when they get out of adjustment they can do some weird things. when you get your manual go through the adjustment procedure and see if that helps



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy