Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

farmall h gasket set frt seal

Welcome Guest, Log in or Register
Author 
poorfarmall 1

05-16-2008 14:23:06




Report to Moderator

looking for good sourse for gaskets,head manif.,water pump, valve cover,etc. ive got the raditor out, wondering about frt. crank seal& wear ring do they have such a thing? how dificult to chang seal? thanks again




[Log in to Reply]   [No Email]
Owen Aaland

05-18-2008 00:47:58




Report to Moderator
 Re: farmall h gasket set frt seal in reply to poorfarmall 1, 05-16-2008 14:23:06  
If you have a front crank seal leaking on an H you have other problems than just the seal.
Originally the seal is installed with the lip facing forwards to keep dirt from being drawn into the engine. If you have oil leaking out out you have a worn crank and bearings, a restricted crankcase vent system, or too much blowby past the rings..



[Log in to Reply]  [No Email]
rust collector

05-16-2008 15:25:44




Report to Moderator
 Re: farmall h gasket set frt seal in reply to poorfarmall 1, 05-16-2008 14:23:06  
Case IH dealers will be able to get gaskets and seals as well as Yesterday's Tractors vendors. Not difficult to replace the seal if you have a puller to remove the pulley and the front steering bolster is out of the way.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy