Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

brakes on a 340

Welcome Guest, Log in or Register
Author 
Cory A.

05-06-2008 21:12:30




Report to Moderator

How can I adjust the brakes on a 340. It"s really hard to get this tractor to stop. thanks!!




[Log in to Reply]   [No Email]
glennster

05-07-2008 12:07:43




Report to Moderator
 Re: brakes on a 340 in reply to Cory A., 05-06-2008 21:12:30  
here ya go, right from the owners manual
third party image

[Log in to Reply]  [No Email]
Mark W.

05-07-2008 04:29:14




Report to Moderator
 Re: brakes on a 340 in reply to Cory A., 05-06-2008 21:12:30  
You can adjust the breaks by tightening the adjustor nuts on the brake rods under the footboards. Make sure your calipers are free moving inside the drums and that you have enough brake disc left. If you do not have enough disc you can grind the housing, expensive repair.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy