Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Photographing tractors

Welcome Guest, Log in or Register
Author 
LenNH

05-05-2008 06:17:36




Report to Moderator

Here's a tip on photos. Not from a "pro," but a 40-plus year "avid amateur":
Digital cameras typically have zooms that go from "wide-angle" to "telephoto." When you use the wide-angle setting up close, everything close to the lens is magnified out of proportion to whatever is behind it. Take a person with an arm outstretched toward the camera and you get a hand that may appear as big as the face. The same will happen if you take a fairly close-up shot of a tractor. From the side, the rear wheels will appear too big for the tractor. From the front, the radiator will seem too wide.

Another problem with the wide-angle is that if the camera is TIPPED a little bit, vertical lines will appear to be tilted inward or outward, depending on which way the camera is tipped. This is why so many of those great shots we took on our vacations show buildings with walls that lean toward each other. Here is a very easy way to avoid both these problems: ZOOM OUT and back away if you can. The telephoto settings minimize the "too-close too-big" look AND reduce the chances of getting vertical lines to lean inward or outward. With the digital camera, it costs nothing to experiment. A few minutes trying a few pictures at different zoom settings will give you an idea of what your camera will do. Some of the effects I'm talking about don't show up very well on the tiny digital screens, so you may have to put them on the computer screen to see the results of your experiments. Before the digitals became all the rage, photographers usually had to change lenses to go from very wide-angle to telephoto (some zooms did both). It was a common photographic trick to use a fairly wide-angle lens to distort things in the way I talk about above. Usually, this was deliberate. Today, we don't often think about whether our digital lens is "wide-angle," "normal" or "telephoto." The effects are there, but we just don't think about them. I've taken quite a few pictures of buildings with tilting walls, or of people whose hands are bigger than their faces, before learning that I had to stop and think about the effect I wanted. It's fun to experiment, it's fun to play tricks with the camera, AND it's fun to get exactly what you want to show. Hope this is helpful.

[Log in to Reply]   [No Email]
rich4

05-05-2008 11:37:34




Report to Moderator
 Re: Photographing tractors in reply to LenNH, 05-05-2008 06:17:36  
Another tip, I have seen a lot of pictures with more background than tractor, try to allmost fill the camera viewing frame of the subject, this means get closer or zoom in more. Much better pic's will result.



[Log in to Reply]  [No Email]
GordoSD

05-05-2008 11:17:29




Report to Moderator
 Re: Photographing tractors in reply to LenNH, 05-05-2008 06:17:36  
Take a look at some car magazines. The really great front quarter photos are taken from a ladder. You can't get the hood, fenders, and top any other way. If you have to go with just one photo, that is where to go.

Gordo



[Log in to Reply]  [No Email]
Log Skidder

05-05-2008 08:26:43




Report to Moderator
 Re: Photographing tractors in reply to LenNH, 05-05-2008 06:17:36  
Great tips, but you meant to say ZOOM-IN, and not ZOOM-OUT.

One more tip, if I do say so myself. It is often nice to be at the same level as the subject you are shouting. Too often people take pictures of flowers while standing. What you get is a "fly over shot". It is much better to squat. Even when taking pictures of say people sitting on a bench, the shot will be better if you squat to the people's level. This is not likely too much of an issue when photographying tractors, but it could be if you are getting an action shot and you are shooting from a hill side or such.

One more, quater on shots are often more interesting that totally oblique shots.

[Log in to Reply]  [No Email]
Bob M

05-05-2008 08:16:48




Report to Moderator
 Re: Photographing tractors in reply to LenNH, 05-05-2008 06:17:36  
third party image

Good advice Len!

The farther away you stand and the more telephoto you employ, the less distorted (and generally more pleasing...) image is the result.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy