Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Unternational 434 Tractor Steering

Welcome Guest, Log in or Register
Author 
RickR

04-15-2008 16:54:08




Report to Moderator

I live in Ontario, Canada and need info to fix the steering box of my 1960 - 1964 era International 434 gas powered tractor. Looking for a parts manual and good place for parts.




[Log in to Reply]   [No Email]
Rex in Australia

04-15-2008 18:21:06




Report to Moderator
 Re: International 434 Tractor Steering in reply to RickR, 04-15-2008 16:54:08  
Rick, I recently did mine up. Water had run down in to it and rusted out the bearings etc. The ball bearings were quite cheap bought singly from a bearing supplier, re-use the races if you can. The seal was a standard size and got from the same place. Made my own gaskets.
My other trouble was the worm and peg fairly knocked around. I ground out the worst damage and reset it so the peg runs on a different face. A bit bodgy, but works ok in the field.
Good tractors!
All the best, and God Bless,
Rex

[Log in to Reply]  [No Email]
JimB2

04-15-2008 17:55:19




Report to Moderator
 Re: Unternational 434 Tractor Steering in reply to RickR, 04-15-2008 16:54:08  
Hi Rick, go to CaseIH parts at:http://www.caseih.com/home.aspx?RL=ENNA
Then click on Search for Parts and in Model box type 434.

Try>Link

JimB



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy