Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Any requests? Pictures, video, etc. from the farm in ND...

Welcome Guest, Log in or Register
Author 
Steven f/AZ

04-11-2008 08:24:34




Report to Moderator

Any special requests for pictures and/or video of anything while I'm in ND on Dad's farm?

I'm hoping to get some inventory on H and M parts while I'm there, too.

Can't wait to get out of this city for two weeks!!!




[Log in to Reply]   [No Email]
Steven f/AZ

04-11-2008 19:30:35




Report to Moderator
 Re: Any requests? Pictures, video, etc. from the farm in ... in reply to bellyacre, 04-11-2008 08:24:34  

D&Dservice said: (quoted from post at 18:32:54 04/11/08) Dont hesitate to call if ya need anything when you get back up in gods country! always a cold drink for the weary traveller! Have a safe trip.


Thanks for the offer! I don't imagine getting down that way, but who knows where an auction sale on a rainy day might take me!

[Log in to Reply]  [No Email]
GA Dave

04-11-2008 20:38:13




Report to Moderator
 Re: Any requests? Pictures, video, etc. from the farm in ... in reply to Steven f/AZ, 04-11-2008 19:30:35  
You can run but you can't hide. I couldn't copy and paste the farm so I took a photo of the screen. I'm on slooow dialup also. David.third party image



[Log in to Reply]  [No Email]
Damp;Dservice

04-11-2008 18:32:54




Report to Moderator
 Re: Any requests? Pictures, video, etc. from the farm in ... in reply to Steven f/AZ, 04-11-2008 08:24:34  
Dont hesitate to call if ya need anything when you get back up in gods country! always a cold drink for the weary traveller! Have a safe trip.



[Log in to Reply]  [No Email]
Steven f/AZ

04-11-2008 16:32:15




Report to Moderator
 Re: Any requests? Pictures, video, etc. from the farm in ... in reply to Steven f/AZ, 04-11-2008 08:24:34  
With a little help from Google Earth, Dad's farm is located at 46 degrees 26' 25.32" N and 103 degrees 01' 52.05" W

And a print screen with a bit of photo editing (I'm not real good) the dot is the approximate location of the farm:

third party image



[Log in to Reply]  [No Email]
IaGary

04-11-2008 15:25:39




Report to Moderator
 Re: Any requests? Pictures, video, etc. from the farm in ... in reply to Steven f/AZ, 04-11-2008 08:24:34  
Yep lets see the lay of the land.

Gary



[Log in to Reply]  [No Email]
Steven f/AZ

04-11-2008 16:02:07




Report to Moderator
 Re: Any requests? Pictures, video, etc. from the farm in ... in reply to IaGary, 04-11-2008 15:25:39  

IaGary said: (quoted from post at 15:25:39 04/11/08) Yep lets see the lay of the land.

Gary


Well, here's an aerial of the farm yard:

third party image

Harvest with a pretty good background landscape:

third party image

Mainly rolling hills, except for a few buttes now and then, the one in the back ground is the East Rainy Butte:

third party image

The mailbox tractor turned green about the time we got the 4450 MFWD with 740 Classic loader... :oops:
Another old harvest photo:

third party image

I'll try to get some good landscape pictures - seems like every one I take turns out poorly due to gloomy days.

[Log in to Reply]  [No Email]
Coffee Helps

04-11-2008 13:39:54




Report to Moderator
 Re: Any requests? Pictures, video, etc. from the farm in ... in reply to Steven f/AZ, 04-11-2008 08:24:34  
No special requests from here. Any of your tractor & farm pictures are good to look at, as usual.



[Log in to Reply]  [No Email]
Steven f/AZ

04-11-2008 12:43:39




Report to Moderator
 Re: Any requests? Pictures, video, etc. from the farm in ... in reply to Steven f/AZ, 04-11-2008 08:24:34  
Mike, when I get there I'll email you for your address and check on shipping for a steering post... although you should be able to find a good one locally at your salvage yard, who knows - maybe shipping will be reasonable! And I'll look for choke guide plates and wire clips.

Bob, Dad's farm is in the SW corner of the state, about 50 miles from MT and 50 miles from SD. He leased out mineral rights to an oil company a few years ago, lease is just about up I think and no one has been there to check it out. There are oil wells about 30 miles from our farm... darn. Actually, had an oilwell in the late 70's on the property, but didn't own mineral rights and the well didn't produce - but Dad did OK on surface damage payment.

[Log in to Reply]  [No Email]
Mike CA

04-11-2008 12:06:33




Report to Moderator
 Re: Any requests? Pictures, video, etc. from the farm in ... in reply to Steven f/AZ, 04-11-2008 08:24:34  

Steven f/AZ said: Mike CA: It was basically just those wire clips, right? I don't think UPS shipping would be too bad on a steering post... what's wrong with yours?


Yeah, all the wiring clips and choke guides you can get for under the gas tank of an H.
As far as my steering post, I thought it was because I had mis-matched tires, but the steering post is bent slightly to the right. A tree fell on the tractor years ago and bent the steering wheel and gas tank. Tank was replaced, steering wheel wasn't. Steering post wasn't either probably because they didn't notice or didn't care. Well, when I added the light bar I could really tell, so I want to replace it.

[Log in to Reply]  [No Email]
Bob

04-11-2008 11:51:03




Report to Moderator
 Speaking of ND... Persia on the Prairie in reply to Steven f/AZ, 04-11-2008 08:24:34  
Steven,

Are you guys in this area:

"BISMARCK – A federal report on how lucrative potential oil production is in the Bakken Shale formation will be released Thursday.

Sen. Byron Dorgan, D-N.D., and the North Dakota Industrial Commission have pushed the U.S. Geological Survey for nearly two years to complete a new study of the Bakken, which underlies western North Dakota, eastern Montana, southern Saskatchewan and southwestern Manitoba.

Dorgan and other North Dakota officials sought the new study because a previous USGS study in 1999 was never released when its author, Leigh Price, died before it could be peer-reviewed. Price estimated the formation holds up to 400 billion barrels of oil.

By contrast, the Arctic National Wildlife Refuge is estimated at 16 billion barrels.

Dorgan said he and the USGS will hold a briefing Thursday.

Dorgan spokesman Justin Kitsch said it is likely that the USGS would make the full report available on its Web site the same day.

Don Canton, a spokesman for Gov. John Hoeven, noted that the North Dakota Division of Mineral Resources’ Oil and Gas Division is also doing a study of the Bakken formation that is specific to North Dakota’s geology. The results will be released at a Williston Basin Petroleum Conference in Minot on April 28."

[Log in to Reply]  [No Email]
Ron in Nebr

04-11-2008 10:30:22




Report to Moderator
 Re: Any requests? Pictures, video, etc. from the farm in ... in reply to Steven f/AZ, 04-11-2008 08:24:34  
How about some close-up shots of both sides of any current credit cards, bank statements, etc?

Just kidding! You were gonna check on a W-9 exhaust manifold for me I think. Also, I kinda remember the guy with the tractor I"m looking at saying the carb was missing too, so check and see if you have any W-9 carbs.

No big deal if the manifold(s) aren"t any good, I see there"s new ones available on ebay for less than 200 bucks(maybe some on this site too- haven"t checked yet?)

Have a safe trip!

[Log in to Reply]  [No Email]
Steven f/AZ

04-11-2008 10:56:01




Report to Moderator
 Re: Any requests? Pictures, video, etc. from the farm in ... in reply to Ron in Nebr, 04-11-2008 10:30:22  

Ron in Nebr said: (quoted from post at 10:30:22 04/11/08) How about some close-up shots of both sides of any current credit cards, bank statements, etc?
Just kidding! You were gonna check on a W-9 exhaust manifold for me I think. Also, I kinda remember the guy with the tractor I"m looking at saying the carb was missing too, so check and see if you have any W-9 carbs.
No big deal if the manifold(s) aren"t any good, I see there"s new ones available on ebay for less than 200 bucks(maybe some on this site too- haven"t checked yet?)
Have a safe trip!


Sorry, can't help with the credit cards or bank statements...

W-9 manifold and carburetor are a no. I know one of my tractors was missing the carb, and the manifold was rusted through from sitting full of water.

I think the only real useful W-9 parts I have left would be 4 connecting rods and 3 pistons. Not sure of the bore size of them, either. And I might just keep those just in case I have trouble with mine...

Glenn F: I am taking this part of my life and putting money away for retirement so that someday I can live on the farm and play on a few acres. With current fuel, fertilizer, and chemical prices, I'm happy to have a steady paycheck from working as a teacher. Being a teacher also provides me with vacation time to spend on the farm (where I regain my sanity!). Overall, I am happy - I know that what I'm doing now will provide me with enjoyment later on in life.

Now that I have my own house with a bigger garage I plan to haul some engines down here in the fall to tinker with on weekends, etc. Maybe even get a tractor hauled down here to restore in the next year or two. The "big" project will be my '51 IH pickup, just don't have the income to support that restoration yet.

Mike CA: It was basically just those wire clips, right? I don't think UPS shipping would be too bad on a steering post... what's wrong with yours?

[Log in to Reply]  [No Email]
Glenn F.

04-11-2008 09:58:14




Report to Moderator
 Re: Any requests? Pictures, video, etc. from the farm in ... in reply to Steven f/AZ, 04-11-2008 08:24:34  
Steven:
I feel for you. Your heart is obviously on the farm. I'd sure be reviewing my options....Life is too short.

Glenn



[Log in to Reply]  [No Email]
Mike CA

04-11-2008 09:06:11




Report to Moderator
 Re: Any requests? Pictures, video, etc. from the farm in ND. in reply to Steven f/AZ, 04-11-2008 08:24:34  

Steven f/AZ said: Any special requests for pictures and/or video of anything while I'm in ND on Dad's farm?

I'm hoping to get some inventory on H and M parts while I'm there, too.

Can't wait to get out of this city for two weeks!!!


You've got my request. I was thinking of adding the steering post to the request, but shipping would be a killer I think. I can probably find a local one.
Have fun!

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy