Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

i-4 international tractor

Welcome Guest, Log in or Register
Author 
plumb

03-16-2008 18:38:46




Report to Moderator

i am replacing rear axle seals on tractor,ihave the axle removed and the wheel hub removed from the axle. i need to know how to remove the bearing spacer i removed the pin which looks like its only purpose is to keep the spacer from turning because it omly extends in between the splines on the axle. i dont know if it is pressed on or screwed on or what




[Log in to Reply]   [No Email]
J.J. from Afton

03-16-2008 20:50:34




Report to Moderator
 Re: i-4 international tractor in reply to plumb, 03-16-2008 18:38:46  
Once the pin is out I believe you just slide or press the spacer off the axle depending how tight it fits or if it is rusted on the axle. I couldnt get one of the spacers on my 560 Standard to budge., even with a big T puller. So I had to pull everything else of and use a bearing splitter and hydraulic press to get the thing off, just because it was rusted so bad.
third party image
third party image

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy