Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

H questions and introduction

Welcome Guest, Log in or Register
Author 
Flathead Youngi

03-06-2008 18:23:24




Report to Moderator

Hey, fellas. I've been coming to this website for information for quite a while for various information. I just let my 8N go to my grandpa. However, my love is ole' Flathead Ford V8's. I have a little model A roadster that I built into a traditionally styled hot rod; flathead, banjo rear, dropped straight axle, 32 pedals, 35 spoke wheels with wide whites, etc, etc.

Well, let me tell you my situation. I think I'm about to purchase a 40 acre plot of ground. It's half wooded and half old farm field that has been growing up for about 5-10 years. Mostly just underbrush, etc.

I can't afford a modern day tractor and, really, I love the old one's about as much as my little flathead V8 and old Ford cars. Will an H tractor handle a 6' or so bush hog? How well will it handle one? I don't want to cut trees down. I just want to keep up with the fields. And, like my ole' flatty, old stuff was/is built to last a lifetime and I CAN WORK ON IT- unlike this modern day computer controlled time bombs (sorry for the rant). I found an H with a three point hydraulic hitch (do those retrofit hitches REALLY work well...be honest with me) and a belly mower. It looks to be in nice shape (tires, paint, etc) and the price seems reasonable at $2200.

I'm really going to rely heavily on you fellas opinions. I don't want to plop down the cash only to wish I had bought an M or a completely different tractor. Will I be stuck in 1st gear spending 4 hours to cut 1 acre?

Thanks!!
Jeff
Southern Ohio

[Log in to Reply]   [No Email]
Flathead Youngin

03-07-2008 13:20:38




Report to Moderator
 Re: H questions and introduction in reply to Flathead Youngin', 03-06-2008 18:23:24  
Thanks for the advice, fellas. I don't care about having it look finished and I don't care about cutting all of it.

I know grandpa usually does his bush-hogging, what, a couple of times in the spring and once in the fall.

Mainly I want to keep the "trails" around the perimeter of the property open and then just cut certain sections at staggered times. I agree, a 6' hog on 20 acres will put calasus on your butt!

And, I think I'm wrong. The guy had it listed as "hydraulic lift" and I assumed it was a 3 pt. hitch. So, even though it's a really nice looking tractor, I'd rather buy one with a 3pt already on it. It seems like I remember 3pts for the M were about $900 or so.

I think I'm gonna try to find one and give it a shot....

Thanks!

[Log in to Reply]  [No Email]
r4etired

03-07-2008 07:19:27




Report to Moderator
 Re: H questions and introduction in reply to Flathead Youngin', 03-06-2008 18:23:24  
It mostly depends on what you want the finished mowing to look like, If you are trying to get a house yard look you will work the H to death. If you are satisfied with a 6in cut you will probably be okay. Just make sure it is dry when you mow. if you walk thru it and your shoes get wet it is too wet to mow.You will find regard less of the implement. dry is better.



[Log in to Reply]  [No Email]
Allan In NE

03-07-2008 05:13:32




Report to Moderator
 Re: H questions and introduction in reply to Flathead Youngin', 03-06-2008 18:23:24  
The H will handle the mower just fine and he's got it priced right on the money at $2200.

However, hope you have plenty of time. A 6' mower on 20 acres is gonna make for one very long summer.

Allan



[Log in to Reply]  [No Email]
gene bender

03-07-2008 02:55:56




Report to Moderator
 Re: H questions and introduction in reply to Flathead Youngin', 03-06-2008 18:23:24  
Having sharp blades on the bush hog is a great help along with having the angle of the blades cut in relation to the ground. Not cutting 2ft high stuff cutting in the rain. The H will do a great job just keep the mower in good shape. It wont be a gas hog either



[Log in to Reply]  [No Email]
Janicholson

03-06-2008 20:14:01




Report to Moderator
 Re: H questions and introduction in reply to Flathead Youngin', 03-06-2008 18:23:24  
An H is just fine. oIf you bush hog with it put a over running clutch on the drive. Common part at tractor stores. Sounds like a great opportunity. Flat heads are incredible. And historically important. JimN



[Log in to Reply]  [No Email]
GeneMO

03-06-2008 20:09:55




Report to Moderator
 Re: H questions and introduction in reply to Flathead Youngin', 03-06-2008 18:23:24  
I concur with Gordo. One thing he missed. Kill every sprig of fescue you see. ATV sprayer and roundup herbicide. If you have timber bordering an old field, they recommend spraying in under the timber to kill fescue, then cut almost all the trees in about a 40 foot strip around the timber. This creates the proper "edge" for quail. Here they call the technique Edge feathering. Then put a continious 30' or so food plot around the edge.

Only mow when recommended. Most Fish and Game departments have certain no mow dates.

Consult your Private land services if your state has one.

I think an H may be a little light for a bush hog. We used an M on a 7' bush hog and it could work it unless the material was light and dry.

I was always a little scared to be setting on an old farmall seat and knowing that weed wacker was right behind me if I fell off. With an 8N or something of that sort you set down lower and between two fenders. Just my two cents worth

Good luck,, Gene

[Log in to Reply]  [No Email]
GordoSD

03-06-2008 19:39:43




Report to Moderator
 Re: H questions and introduction in reply to Flathead Youngin', 03-06-2008 18:23:24  
I don't know if you are a conservationist, or a hunter, but you have the ideal acreage for some deer and quail hunting. IF you plant some nice food plots. Forget mowing it down, a bushog is wildlife's worst enemy. This would allow you to have a lot of fun working your H. With the three point you can mount a disc, a broadcast seeder, use for fertilizer also, a sprayer for burning down fields prior to palnting. And a sickle mower for edging. An drill or palnter for row crop or grains. Call your local wildlife and conservation groups on how to get started, then get the equipment you need. And there's some $ in hunts, whether it's archers or muzzleloaders. 40 acres with woods will hold deer there that will never leave if you have food and water for them. Google up QWTM , Quality whitetail management for a start.

Good Luck

Gordo

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy