TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

f-12 primer /fuel return valve?

Welcome Guest, Log in or Register

Author

drawbar

03-03-2008 18:48:22

Report to Moderator

From the factory was the valve bolted on top of the hood, or was the hood botled on top of the valve? I've seen them mounted both ways on different tractors and would like to make sure I mount mine in the same manner as the factory.

[Log in to Reply] [No Email]

Dave Allgire

03-04-2008 12:05:21

Report to Moderator

Re: f-12 primer /fuel return valve? in reply to drawbar, 03-03-2008 18:48:22

I've looked at some pictures of F-12's and F-14's. It looks like, but hard to tell, that the hood is on top. IMO it provides for a more "cleaner" look. Either way, its still hard to get the hood off without disconnecting some of the fuel lines.

[Log in to Reply] [No Email]

James Williams

03-04-2008 10:50:50

Report to Moderator

Re: f-12 primer /fuel return valve? in reply to drawbar, 03-03-2008 18:48:22

Drawbar,The hood should be bolted over top of the valve,that way you can remove the hood without removing the valve
jimmy

[Log in to Reply] [No Email]

teddy52food

03-04-2008 17:45:36

Report to Moderator

Re: f-12 primer /fuel return valve? in reply to James Williams, 03-04-2008 10:50:50

You still can't get the hood off without un doing the lines unless you remove the steering shaft.

[Log in to Reply] [No Email]

drawbar

03-04-2008 18:12:54

Report to Moderator

Re: f-12 primer /fuel return valve? in reply to teddy52food, 03-04-2008 17:45:36

Thanks guys. I kinda figured the hood went on top. Which ever way,the hood can't be a lot of fun to remove. Seems like you have to deal with the steering shaft and possibly the fuel lines. I would rather not mess with the fuel lines any more than I have to cause I'm using all the original fittings.

[Log in to Reply] [No Email]

drawbar

03-04-2008 18:12:47

Report to Moderator

Re: f-12 primer /fuel return valve? in reply to teddy52food, 03-04-2008 17:45:36

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy