Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

650D/WD9/MD etc. injector pump Troubles...HELP

Welcome Guest, Log in or Register
Author 
maestro

03-02-2008 18:27:11




Report to Moderator

I recently had my WD-9 cylinder head redone. All new valves, had it checked for cracks and all is well. Also had the injectors gone over. Started it for the first time yesterday and 2 of the 4 cylinders don't seem to be firing the fuel. It is also fueling out he exhaust a little. Did this before I had the injectors gone thru. Is it possible I have an issue with the pump. One person told me yes. What does anyone else think. I have another pump on a parts tractor but don't want to switch if someone thinks it might be something else. I am pretty sure the guy who worked on the injectors did a good job. There is fuel up at the injector but is doesn't seem to be firing it. I have bleed the system a couple times and it doesn't seem to help. Advice greatly appreciated.

[Log in to Reply]   [No Email]
Harry klever

03-04-2008 19:53:22




Report to Moderator
 Re: 650D/WD9/MD etc. injector pump Troubles...HELP in reply to maestro, 03-02-2008 18:27:11  
hay , u be very careful so that none of that diesel fuel. hits your body, it will go right thru your skin, if any high pressure fuel or hydraulic oil get thru your skin you will need medical attention !! sooner than the better!!



[Log in to Reply]  [No Email]
Chuck's Repair

03-03-2008 10:15:58




Report to Moderator
 Re: 650D/WD9/MD etc. injector pump Troubles...HELP in reply to maestro, 03-02-2008 18:27:11  
Remove the injector from the cylinder that is not firing and reconnect it to the high pressure line so that the fuel injects away from the engine into the air and start the tractor and visualy watch your spray pattern.



[Log in to Reply]  [No Email]
Chuck's Repair

03-03-2008 10:18:54




Report to Moderator
 Re: 650D/WD9/MD etc. injector pump Troubles...HELP in reply to Chuck's Repair, 03-03-2008 10:15:58  
Remember to take the precup out before you start the tractor.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy