Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

W-6 Idea's,

Welcome Guest, Log in or Register
Author 
Kirk in ks,

02-12-2008 16:12:19




Report to Moderator

Is there any way you can put a rotary broom on the fron of a W-6 and have it work?
Ive got the hydralic's and i know they work , But is a broom hooked up mechanically , or to the hydralics?
I can put a rotary mower on back pull type and it''ll work but i dont know about a rotary broom and a blade up front?




[Log in to Reply]   [No Email]
Haas

02-12-2008 18:20:49




Report to Moderator
 Re: W-6 Idea's, in reply to Kirk in ks,, 02-12-2008 16:12:19  
I don't know about the W-6, but I do know that the A and the shop mules were equipped with rotary brooms. On those, the drive was from the front of the crankshaft through the crank hole. A spline fitting was attached to the front pulley and then a shaft ran through the crank hole. I suppose something similar would work for the w-6. I have an I-6 that I installed a blade on. From my experience with that, I will say unless you put power steering on your 6, it will be very clumsy with the broom on there. Due to the weight, very hard to steer.

[Log in to Reply]  [No Email]
RAW in IA

02-12-2008 16:56:05




Report to Moderator
 Re: W-6 Idea's, in reply to Kirk in ks,, 02-12-2008 16:12:19  
It could be mounted and they do drive hydraulically, but I am not sure the W-6 would have enough hydraulic volume to run it unles you added an auxilary pump.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy