Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

4568 IHC

Welcome Guest, Log in or Register
Author 
RIVIR

02-09-2008 13:25:01




Report to Moderator

wanted - information where to get a adapter plate to change my IHC V8 motor to a 400 Cat engine or cummins .




[Log in to Reply]   [No Email]
Joe Schmitt

02-11-2008 06:55:57




Report to Moderator
 Re: 4568 IHC in reply to RIVIR, 02-09-2008 13:25:01  
RR is right there are 2 bellhousings a #1& #2 I believe your 4568 has a #2 I think you will need a #1 to go to a big Cat or Cummins. Be aware of the rpm and tourqe differences on the bigger inline 6`s. They turn slower and have way more tourqe.The transmission & transfercase are designed for the V800: 2650rpms. If you run in a higher gear to maintain the same ground speed you will have trany or tranfercase problems. Also you will have to lenghten the frame. A Detroit 6V92 or 8V92 may be a better match.( not nessesarily better motors ).I considerd all this on my 4586, I rebuilt the V800. Good luck.

[Log in to Reply]  [No Email]
RR Mech

02-09-2008 21:20:30




Report to Moderator
 Re: 4568 IHC in reply to RIVIR, 02-09-2008 13:25:01  
The transmission in your tractor is a S.A. E. standard pattern used on all trucks and heavy equipment. Just find a bell housing to fit your engine that is the same size as your trans. Then you will probably have to build side and front mounts. Hope this helps.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy