Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

706 weak hyd in fel

Welcome Guest, Log in or Register
Author 
russ in canada

02-01-2008 15:22:40




Report to Moderator

Bought this tractor Sept.(1st ever for me) fel was slow and somewhat weak.started out by changing hyd filter and cleaning screen very dirty (not sure it was hyd oil because it was black and looked like dirty engine oil, no burnt smell) put pr. guage on.am getting 1200 - 1250 psi while lifting a full 5 ft. bucket of gravel. when attempting to lift a large round bale(1800 lbs.)the pressure still stays at between 12-an1250 psi but will only lift it about 1 foot.not sure if it is a pmp. problem or a releif valve . dont want to buy a pmp if it needs a releif valve and likewise dont want to buy a releif valve if pmp is bad. thanks for any and all advice. russ

[Log in to Reply]   [No Email]
ChrisAS

02-01-2008 16:23:19




Report to Moderator
 Re: 706 weak hyd in fel in reply to russ in canada, 02-01-2008 15:22:40  
You can't test that way because the pressure will only be as much as it takes to lift the load. Just unhock loader an put guage in the coupling where the loader is and pull hyd lever then the pressure relief valve will open at the max pressure that it will hold. The way you are testing the relief valve may not be opening.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy