TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Farmall B cultivision decal placement

Welcome Guest, Log in or Register

Author

Steve_Md

01-23-2008 05:32:25

Report to Moderator

I have looked through the past messages here and do not see definitive decal placement information for the Farmall "B cultivision". The suggestions are often to buy the "Letter Series Farmalls" book by Guy Fay, which is great to have if you are restoring several tractors. Many of us here may only need information on the location of one or so decals on a particular letter series tractor. For mine and all future readers, could someone scan the pages that pertain to the "B cultivision decal placement" and place it here for all of our benefit? Thanks in advance!

[Log in to Reply] [No Email]

CNKS

01-23-2008 17:51:57

Report to Moderator

Re: Farmall B cultivision decal placement in reply to Steve_Md, 01-23-2008 05:32:25

Buy the book, you do not even have to have a tractor to enjoy the book. Leave a 1/2 inch gap between the curve and the decal. All letter series model id round decals are like that.

[Log in to Reply] [No Email]

ihc49er#2

01-23-2008 10:22:22

Report to Moderator

Re: Farmall B cultivision decal placement in reply to Steve_Md, 01-23-2008 05:32:25

little more info. you should have 1/2" radius away from rib.for B symbol.the decal should sit 1/2" above rib.and located centrally between fuel tank/ hood seam and the point where the rib begins to curve up.this is pretty much standard placement for letter series tractors

[Log in to Reply] [No Email]

ScottyHOMEy

01-23-2008 10:28:07

Report to Moderator

Re: Farmall B cultivision decal placement in reply to ihc49er#2, 01-23-2008 10:22:22

I'm thinkin' you might have misread Steve's question. Your placement is spot of for the oblong "Farmall" decal. I think he was asking about the actual "B" in a circle.

But then again, he may need to know about both. Just trying to avoid confusing him.

[Log in to Reply] [No Email]

Steve_Md

01-23-2008 11:04:51

Report to Moderator

Re: Farmall B cultivision decal placement in reply to ScottyHOMEy, 01-23-2008 10:28:07

Actually any information that pertains to any of the decals listed below would be very helpful. The adhesive backed decal set that I purchased has several:[ 2 (long)farmall, 2(round)B cultivision, H-L-B-D, O-B-D, 2 Be Careful..., Shift pattern, oil level, oil change interval, etc. ]. I am going by memory as to what decals are in the package. Thanks in advance

[Log in to Reply] [No Email]

ihc49er#2

01-23-2008 08:05:25

Report to Moderator

Re: Farmall B cultivision decal placement in reply to Steve_Md, 01-23-2008 05:32:25

the hood decal should be spaced equal distance from back of hood to the raised rib where your "B" is located. the"B" should be centerd where you have it now. like equal distance around that raised rib.hope this helps you, because a person sees lots of decals placed impropely.

[Log in to Reply] [No Email]

ScottyHOMEy

01-23-2008 08:04:56

Report to Moderator

Re: Farmall B cultivision decal placement in reply to Steve_Md, 01-23-2008 05:32:25

They should go in the bottom front corner areas of the hood. I don't recall exactly how far from the edge of the decal to the raised rib, but get it as close as you can to being on the same center as the radius of the curve in the rib.

[Log in to Reply] [No Email]

Mike 50

01-23-2008 07:59:39

Report to Moderator

Re: Farmall B cultivision decal placement in reply to Steve_Md, 01-23-2008 05:32:25

NO that is against the law. BUY THE BOOK.

[Log in to Reply] [No Email]

Steve_Md

01-23-2008 10:39:38

Report to Moderator

Re: Farmall B cultivision decal placement in reply to Mike 50, 01-23-2008 07:59:39

To expand on the original post: I am not suggesting to scan any material that has a copyright. Furthermore, if the desire is to do so, first contact the author/authors for their documented consent to copy the material.

[Log in to Reply] [No Email]

Red Dave

01-23-2008 07:31:52

Report to Moderator

Re: Farmall B cultivision decal placement in reply to Steve_Md, 01-23-2008 05:32:25

First off, to scan and post pages of a copyrighted book is against the law, and I'm not going to do that to Guy.

But this is a picture of my Farmall B showing the "Cultivision" decal, maybe it will help answer your question.

[Log in to Reply] [No Email]

ScottyHOMEy

01-23-2008 08:08:26

Report to Moderator

Re: Farmall B cultivision decal placement in reply to Red Dave, 01-23-2008 07:31:52

Nice lookin' B ya got there, Dave!

And good point on the copying. It'd be one thing if it were an obscure out-of-print reference, but it's entirely another for an in-print book that's still readily available.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy