Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

F-20 front crank seal are there 2?

Welcome Guest, Log in or Register
Author 
Scott Rukke

12-20-2007 12:13:24




Report to Moderator

Looks like there are 2 felt rings on my front engine cover where the pulley goes through. I bought a complete gasket set but it only came with 1 felt seal. I haven't removed the seals yet and need to know if I need to get another one.




[Log in to Reply]   [No Email]
Scott Rukke

12-20-2007 19:08:58




Report to Moderator
 Re: F-20 front crank seal are there 2? in reply to Scott Rukke, 12-20-2007 12:13:24  
Well the slinger goes on the inside of the case against the crank gear. And my outer case does have 2 seals side by side. I ordered a complete gasket kit from Fordson and it only came with 1 seal. One seal doesn't fill the space between the inner wall of the case and the outer edge of the crank pulley.



[Log in to Reply]  [No Email]
Kevin LA-CA

12-20-2007 18:58:23




Report to Moderator
 Re: F-20 front crank seal are there 2? in reply to Scott Rukke, 12-20-2007 12:13:24  
Scott From what I remember, my Regular has a single felt seal. However, it has a long (~3") oil slinger on the crank. The extended front casting is longer to accommodate the slinger too. I think IHC didn't trust the front felt to keep all the oil in the engine. BTW there is a warning about the orientation for installation of the slinger.

kevin



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy