Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Farmall A 100 130 control valve instructions

Welcome Guest, Log in or Register
Author 
Steve Couvillio

12-06-2007 19:58:31




Report to Moderator

Anyone have a set of the overhaul kit instructions to properly replace o rings & gaskets on the hydraulic control valve used on A / SA / 100 / 130 ??

Looks like there are some needle valve under some allen head screws. Do they come out first ? or last ?




[Log in to Reply]   [No Email]
Hugh MacKay

12-07-2007 02:34:13




Report to Moderator
 Re: Farmall A 100 130 control valve instructions in reply to Steve Couvillion, 12-06-2007 19:58:31  
Steve: If your planing to tackle that, I strongly recomend you get the installation instructions from CaseIH. Some dealers sell those few pages with the kit. I have the Blue Ribbon Service manual covering this proceedure, however I've never done one. There are a lot of pieces, would be just about impossible to guide someone online doing this proceedure. There are quite a few guys on here, that have done this, thus you will have lots of back up. If you both have the service manual pages it will be a piece of cake. Just too much chance for misunderstanding without.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy