A little help from the experts.

degreased tractor changed oil/filter changed trans and steering box lube repaired bent clutch insp plate installed new implement mounting bolts replaced all hoses and tower clamps flushed and refilled cooling system cleaned breather and intake caps cleaned oil cup

Things left to be done:

change final drive oil and gaskets r&r front tires clean, inspect and grease wheel bearings replace 2 dented light rings r & r wiring harness replace grommets (before or after painting??) check front wheel wobble replace seat with original type replace grille and side wings

What other things should I be looking for? I do not want to be messing around fixing things after the paint job. The carb leaks when the gas is left on. Should I rebuild it?? It appears that nothing else is leaking, so should I skip replacing various seals and gaskets??

Any and all tips would be appreciated.

Make sure all leaks are repaired and dry.

Then..... ..... ..... ....don't paint it with one of those flashy, wet-look, dull coat/clear coat, mirrored automotive finishes.

Makes 'em look like, and as phoney as, a cheap $3 hooker. :>)

Like I say, just my opinion,

Allan

Andew