Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

combine engines farmall ???

Welcome Guest, Log in or Register
Author 
confuzed

11-06-2007 04:16:32




Report to Moderator

which engines will fit in super c tractors




[Log in to Reply]   [No Email]
agpilot

11-06-2007 06:30:54




Report to Moderator
 Re: combine engines farmall ??? in reply to confuzed, 11-06-2007 04:16:32  
Hello: We had a model 64 with a C engine. The cub engine was standard but many chose the C engine. This was early to mid 1950's. There might be no pilot hole in the crank for a output shaft... but not sure. Also no starter or hydraulics. good luck finding one. agpilot



[Log in to Reply]  [No Email]
gene bender

11-06-2007 05:29:28




Report to Moderator
 Re: combine engines farmall ??? in reply to confuzed, 11-06-2007 04:16:32  
You need that engine which was used on Model 55w BALER. If you could find a pull type combine built after 47 it could have that block. For an implement it would have been built after 51 if you need the 123 block.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy