TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

584 tranmission

Welcome Guest, Log in or Register

Author

ken Opiat

10-28-2007 09:51:15

Report to Moderator

Hello...have a 584 with a broken shaft to the foward reverse shifter.( not the speed trans which is foward of the range trans)..it is a "range " transmission. I took of the seat and the other covers and have found that I have to take off the fuel tank and everything else in sight to take off the top of the trans..... .can the shaft be replaced with the top of the trans off or does the trans have to be taken apart..... ..If I'm going to go that far..... shouldn't I replace the clutch also??? I'm new at this and could use some advice.. thanks in advance for any response.ken

[Log in to Reply] [No Email]

Fromjb2

10-28-2007 13:39:36

Report to Moderator

Re: 584 tranmission in reply to ken Opiat, 10-28-2007 09:51:15

Hi Ken, I saved this from Bernard le m�cano. He was an expert on the 84 series tractors. I haven't seen him on this board for sometime. He was a great resource.

Broken Shifter Lever:

Hi Irving, I have changed many of those parts, at the Case-IH dealer, where I have worked for. You can remove the lever and replace it by the left side of the rear train (transmission?). Just drain the oil, remove the MCV control valve ( the plate that hold the hydraulic pump and filter). With a short 7/8 open wrench, loose(n) the sealed nut, remove the broken shaft and (re)place the new one. It have a big spline for the timing. Just align the short lever with the fork.
Bernard le m�cano Qu�bec Canada

Hope this helps.
JimB

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy