Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

560 cast centers

Welcome Guest, Log in or Register
Author 
leecramsey

10-19-2007 17:21:52




Report to Moderator

Will an M rear cast center fit on a 560 axle? If not which ones will interchange. Got one broke, need to temporary it. Any help appreciated.
Thanks, Lee




[Log in to Reply]   [No Email]
D Slater

10-19-2007 17:45:49




Report to Moderator
 Re: 560 cast centers in reply to leecramsey, 10-19-2007 17:21:52  
If the axle has 2 keyways yes a M wheel will direct bolt on. A 400 or 450 or some later tractors with 8 spoke cast wheels would be a closer match but if your 560 wheel cast # ends with R5 the early wheels are a little less strong. Your 560 rim won't fit the M wheel also. If you have spin outs some of the above won't aply.



[Log in to Reply]  [No Email]
CNKS

10-19-2007 17:39:30




Report to Moderator
 Re: 560 cast centers in reply to leecramsey, 10-19-2007 17:21:52  
I think the axle diameters are the same. However the M hub uses two keys, two slots in the axle; the 560 hub uses one large key, one slot in the axle.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy