Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

1941 A industrial front axle and steering problem

Welcome Guest, Log in or Register
Author 
Jeremy B

10-15-2007 11:03:57




Report to Moderator

How do I get axle pivot pin out since there is an extra support on the back of the steering box. My 1946 A has the standard axle and I tapped it out with a hammer after I loosened it. What should I do on this one?




[Log in to Reply]   [No Email]
Ed Fisher

10-15-2007 17:08:15




Report to Moderator
 Re: 1941 A industrial front axle and steering problem in reply to Jeremy B, 10-15-2007 11:03:57  
Jeremy, the "brace" that extends from the axle pivot to the bellhousing is actually the pivot pin. Lift and safely support the tractor so as to remove the weight from the axle. Loosen the clamps on the axle pivot, unbolt the brace from the bellhousing and rotate it away from the housing and slide it out. Good luck!!



[Log in to Reply]  [No Email]
Jeremy B

10-15-2007 18:54:55




Report to Moderator
 Re: 1941 A industrial front axle and steering problem in reply to Ed Fisher, 10-15-2007 17:08:15  
That is simpler than I thought thanks for the help!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy