Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

need snap ring

Welcome Guest, Log in or Register
Author 
hopfarm

10-10-2007 03:51:19




Report to Moderator

Can anyone help me find the snap ring that holds the bull pinion bearing in the housing? Manual says it's p.n. is 27 071 H. Local dealer says not available. This is in the housing that is under the brake cover. Damn gremelin musta got the ring. All parts layed out and covered waiting for new parts but no snap ring. Brain clutch plate must be a little worn.




[Log in to Reply]   [No Email]
Bob

10-10-2007 06:20:08




Report to Moderator
 Re: need snap ring in reply to hopfarm, 10-10-2007 03:51:19  
Parts Depot on Chilton, WI, shows 6 of them on their on-line system.

They WILL NOT sell direct to you, MOST dealers are set up with them. Tell your parts guy to get off his duff, and order you a correct one from the Depot.



[Log in to Reply]  [No Email]
El Toro

10-10-2007 04:54:13




Report to Moderator
 Re: need snap ring in reply to hopfarm, 10-10-2007 03:51:19  
You can get snap rings from Napa, but you need to measure the part it goes on to get a size. Hal



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy