Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Case 61MB Belly Mower for a C

Welcome Guest, Log in or Register
Author 
Justin S. - TX

10-04-2007 11:14:53




Report to Moderator

Does anyone know if a Case 61MB Mower will work on a C? If anyone has photos of how it connects I would greatly appreciate it. Thanks.




[Log in to Reply]   [No Email]
NDS

10-05-2007 05:54:37




Report to Moderator
 Re: Case 61MB Belly Mower for a C in reply to Justin S. - TX, 10-04-2007 11:14:53  
Mounting mower should not be too hard but getting pulleys set up for belts will be a challenge they have to be positioned and angled almost exactly right for belt to stay on.



[Log in to Reply]  [No Email]
Nat 2

10-04-2007 12:46:52




Report to Moderator
 Re: Case 61MB Belly Mower for a C in reply to Justin S. - TX, 10-04-2007 11:14:53  
More than likely, it is not a bolt-on job. You will need to get out the torch, the welder, and a bunch of scrap steel to build custom brackets for mounting the mower on a Super C. It was designed to fit a Case tractor, and probably has brackets for a Case tractor.

It may have been done somewhere sometime but the likelihood that a person who's made these modifications is on this forum, let alone is still even alive at this point, is very very small.

You're basically on your own at this point. If you're looking at this mower to purchase, and you don't have any fabrication skills, pass on it unless it's too good to pass up.

Best thing to do is set the mower under the tractor and lay out the brackets just to size things up.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy