Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

504 Injector Lines

Welcome Guest, Log in or Register
Author 
GSR

09-28-2007 10:37:32




Report to Moderator

Looking for a good set of injector lines for a 504, any good places to look? Thanks




[Log in to Reply]   [No Email]
K.B.-826

09-28-2007 15:56:32




Report to Moderator
 Re: 504 Injector Lines in reply to GSR, 09-28-2007 10:37:32  
You should be able to use 560 lines. The D-188 in the 504 is just the four cylinder version of the 560's D-282. Get lines 1 through 4. 1 should match up just about pefect. 2, 3, and 4 will probably need a little bending, as the outlet ports on the four cylinder injection pump are going to be about 30 degrees away from where they would be on the six cylinder pump. Be real careful when bending injection lines, make your bend over as long of a span as possible. The diesel engine textbooks will tell you not to bend injection lines ever, but in the real world it gets done and works if you're careful.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy