Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

New clutch in 756D, Do TA too?

Welcome Guest, Log in or Register
Author 
redtom

09-15-2007 18:22:27




Report to Moderator

I'm pretty sure the clutch is done in my 756D, the pedal is way high and has free play. Only about a 1/2 in of clutch pedal movement to release. My question is, should I go ahead and do the TA? Is there a sure fire way to inspect the TA like looking at the discs on the old mechanical TA's?




[Log in to Reply]   [No Email]
Kevin Meier

09-15-2007 18:47:08




Report to Moderator
 Re: New clutch in 756D, Do TA too? in reply to redtom, 09-15-2007 18:22:27  
You can do a visual inspectiion by looking over the discs, splitting the t/a in half and looking at the carrier and sprag. All of my ta"s are air tested with an air gun and a jumper tube. If you need help doing any of this feel free to email me.
Kevin



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy