Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

m farmall front end question

Welcome Guest, Log in or Register
Author 
1965LONEWOLF

09-04-2007 04:07:21




Report to Moderator

I HAVE A FARMALL M FOR PULLING . I HAVE FARMALL B RIMS AND TIRES ON IT ( 4 X 15 INCH ) EITHER NEED A TALLER TIRE OR DIFFRENT SIZE RIMS AND TIRES , I USE IT FOR PULLING AND IT HAS A NICE PITCH FOR PULLING A TRANSFER SLED BUT ITS NOT WORKING FOR A DEADBOLT ( DEAD WEIGHT - STONEBOLT ) PULLING, NEED TO GET THE FRONT END UP ABOUT TWO - THREE INCHES - ANY IDEA"S ?




[Log in to Reply]   [No Email]
Janicholson

09-04-2007 15:00:29




Report to Moderator
 Re: m farmall front end question in reply to 1965LONEWOLF, 09-04-2007 04:07:21  
(some people react to all capitals, so use UPPER and lower and get more answers)
I don't care, and have an Idea.
you do not say if it is narrow, or wide, if narrow, 750-16 might do the trick. If wide, there are 17 inch wheels that fit some hubs. JimN



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy