Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

W-30 misses under load

Welcome Guest, Log in or Register
Author 
F-Dean

08-31-2007 06:15:52




Report to Moderator

Yesterday, I tried to use my 1934 IHC W-30 to "Bush Hog" some weeds. It runs just fine going to and from the field but under a load, it misses. Is this a timing problem? A carburetor problem? (I tried adjusting it without success.) A valve problem? (The engine was recently rebuilt.)
Any advice on where to start would be greatly appreciated.




[Log in to Reply]   [No Email]
Hoss in Maine

09-01-2007 14:28:24




Report to Moderator
 Re: W-30 misses under load in reply to F-Dean, 08-31-2007 06:15:52  
Turn load screw in 1/4 turn at time and use next hotter plug.Later Hoss



[Log in to Reply]  [No Email]
russ hamm

08-31-2007 07:57:14




Report to Moderator
 Re: W-30 misses under load in reply to F-Dean, 08-31-2007 06:15:52  
Sounds like a carb problem, i would start there. Have you adjusted the load screw ? Has is set idle for any time?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy