Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Good news and bad news

Welcome Guest, Log in or Register
Author 
Mike CA

08-18-2007 22:16:34




Report to Moderator

Good news: '44 H now lives in Suburbia. It is sitting in my driveway now.
Bad news: You are about to be flooded with a stream of questions! So be prepared. Ok, let me tell you about my day... but first, a pic...

third party image

Ok, so got up early and drove about 130 miles with the guy from the EDGE&TA club I joined in his rig and trailer. Winched the tractor on board and secured and picked up the parts he had to go with it... a new throttle since the current one has a stopper welded onto it, NOS gas tank, draw bar, old govenor and an original owners manual. We drove it home and off-loaded it from the trailer and got help from a neighbor to push it up into my driveway.

Later I washed it with my sons. Got a lot of dirt off of it, but there is still a good bit of caked on grime to work at. Later in the evening a question occured to me... I knew the owner had drained the water to save it from the big freeze in the winter. But was there oil? I learned that the oil pan had been smashed, and Tom (the EDGE member) suggested I take a good look in there to make sure the oil pump wasn't damaged. The damage to the pan could explain why I couldn't get the petcocks open. My ignorance on how to properly open a petcock could explain it as well. So, owners manual be damned, I set off to fetch tools. I grabbed a coffee can to open the drain plug a little to see if there was water in the oil, and if there was any oil at all. So I turned and turned and got a couple of drops, but no real flow, which I needed to see water, so I unscrewed it some more and... *pop* it flew right out of my hand against a thick stream of black oil! "Coffe can!!" I grabbed it and held it with oil covered hands... "oh crap, this is a lot... PLUG!!!" I grabbed it and wrestled it in an inch from the top of the can. I have oil all over my driveway now.
Day 1, lesson 1.... CHECK

Well, since I started it... I grabbed a bigger container and finished off the drain. Then I pulled the pan. Pump like fine as far as I can tell. Nothing bent.
So I spent the rest of the evening spreading kitty litter over the oil and I'm going to be sweeping in the morning and using a concrete cleaner after the tractor gets out of the way.
I've got a few questions about things I've found on the tractor so far. So be prepared... third party image

[Log in to Reply]   [No Email]
Daniel H.

08-20-2007 15:33:03




Report to Moderator
 Re: Good news and bad news in reply to Mike CA, 08-18-2007 22:16:34  
I think those petcocks are left hand thread. Which is opposite of what comes natural.



[Log in to Reply]  [No Email]
Steven f/AZ

08-20-2007 17:15:51




Report to Moderator
 Re: Good news and bad news in reply to Daniel H., 08-20-2007 15:33:03  

Daniel H. said: (quoted from post at 15:33:03 08/20/07) I think those petcocks are left hand thread. Which is opposite of what comes natural.


All the oil petcocks on my tractors are a standard right-hand thread. Lefty loosey, righty tighty. third party image

[Log in to Reply]  [No Email]
Mike CA

08-20-2007 16:28:09




Report to Moderator
 Re: Good news and bad news in reply to Daniel H., 08-20-2007 15:33:03  

Daniel H. said: (quoted from post at 15:33:03 08/20/07) I think those petcocks are left hand thread. Which is opposite of what comes natural.


I'll have to give that a try! third party image

[Log in to Reply]  [No Email]
Lanse

08-19-2007 05:37:38




Report to Moderator
 Re: Good news and bad news in reply to Mike CA, 08-18-2007 22:16:34  
Welcome to the club, you have met 2 requirements

1) owning a tractor/wanting to
2)Having some mishap with oil (there was a long post about this a few days/weeks ago, called "Do I get an award for this?")



[Log in to Reply]  [No Email]
georgeky

08-19-2007 04:25:21




Report to Moderator
 Re: Good news and bad news in reply to Mike CA, 08-18-2007 22:16:34  
The first of many greasy oily spots to contend with now that you are an old tractor guy. Congrats on getting it home.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy