Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

IH piston ID?

Welcome Guest, Log in or Register
Author 
uncle fred

08-01-2007 09:03:01




Report to Moderator

I am tearing down a 291 IH motor and the pistons are an IH with a 4127 number. I would like to know what these are.

I had the sleeves pulled and they are not the original size as the block has been bored to accommodate the sleeve size. I am going to rebuild the motor for a pulling project.

I was only told the motor was a 291 when I purchased it. Thanks.




[Log in to Reply]   [No Email]
El Toro

08-01-2007 17:27:56




Report to Moderator
 Re: IH piston ID? in reply to uncle fred, 08-01-2007 09:03:01  
You should contact your local Case/IH dealer and give them the numbers off the pistons and sleeves
and see if they have the dimensions. Your local machine shop can probably get a sleeve kit after he has measured the block bore. Hal



[Log in to Reply]  [No Email]
uncle fred

08-01-2007 19:04:06




Report to Moderator
 Re: IH piston ID? in reply to El Toro, 08-01-2007 17:27:56  
The PN on top is 395365R1. Thanks.



[Log in to Reply]  [No Email]
El Toro

08-02-2007 03:29:52




Report to Moderator
 Re: IH piston ID? in reply to uncle fred, 08-01-2007 19:04:06  
That's what Case/IH needs to look it up on their computer. If you can call 1-800-732-0017 if you have a problem. Be sure to ask for farm tractor parts. Hal



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy