TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Behlen Road Gear on F20

Welcome Guest, Log in or Register

Author

07-27-2007 06:47:33

Report to Moderator

I have recently finished the restoration of my wide front F20N. It is equiped with a behlen road gear. The seal on the input shaft leaks and it is a odd seal. It presses into the front cover and the rubber lip that contacts the yoke is quite long and cone shaped. Does anybody know a part number for this seal or where I can get one? Will a comon seal that matches the bore and shaft size work? I don't real want to pull the old seal out right now and destroy it because then I will be dead in the water without a replacement.

[Log in to Reply] [No Email]

gene bender

07-28-2007 03:36:02

Report to Moderator

Re: Behlen Road Gear on F20 in reply to ET, 07-27-2007 06:47:33

Take it apart and go to a auto parts store and they can measure and get a new one within 24hrs as you have to take it apart anyway to replace. You would only be torn down two days

[Log in to Reply] [No Email]

Bob Kerr

07-27-2007 07:39:06

Report to Moderator

Re: Behlen Road Gear on F20 in reply to ET, 07-27-2007 06:47:33

Go to a bearing house, They will either have or get the seal, or match a newer style to what you need. Better check your input shaft bearings also, the ones in my f-12 road gear are toast and the front seal leaked like a sieve.

[Log in to Reply] [No Email]

07-27-2007 08:29:17

Report to Moderator

Re: Behlen Road Gear on F20 in reply to Bob Kerr, 07-27-2007 07:39:06

Thanks for the reply. My bearings are good I've had it all apart and could not find any numbers on the seal. I do have a good bearing and seal supplier but I hate to pull the seal and get stuck without one.

[Log in to Reply] [No Email]

RustyFarmall

07-27-2007 12:11:31

Report to Moderator

Re: Behlen Road Gear on F20 in reply to ET, 07-27-2007 08:29:17

I'd say just find a seal that fits the bore and shaft size and call it good.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy