Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Re: 2400A (454) clutch

Welcome Guest, Log in or Register
Author 
Janicholson

07-07-2007 15:20:01




Report to Moderator

That is good news within the bad. I would fet a new six pad "disk" and check the thickness between it and the old one. If the old one was 80% or less I would put in a new driven disk. The finger adjusters may need to be replaced if they are toasted. IH has had them in the past. Good luck, JimN




[Log in to Reply]   [No Email]
rret

07-08-2007 04:04:59




Report to Moderator
 Re: 2400A (454) clutch in reply to Janicholson, 07-07-2007 15:20:01  
while replacing the throwout bearing i figured i would replace the PP and clutch disk too. the clutch kit from hy-capacity had a chinese made pilot bearing which i decided not to use. the tractor used to grind a little when going from Neutral to forward or reverse. now it is grind free. the new clutch really helps.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy