Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

560 motor swap

Welcome Guest, Log in or Register
Author 
LittleMackinawFarmall

07-05-2007 21:16:06




Report to Moderator

How hard is it to pull the motor and replace in a 560 D have plenty of ways to lift etc but do u need to split to get at all the bolts etc or can it be dont easily without removing the entire front half?




[Log in to Reply]   [No Email]
LittleMackinawFarmall

07-06-2007 07:02:42




Report to Moderator
 Re: 560 motor swap in reply to LittleMackinawFarmall, 07-05-2007 21:16:06  
Pardon my middle of the night ponderings....



[Log in to Reply]  [No Email]
Owen Aaland

07-06-2007 01:42:25




Report to Moderator
 Re: 560 motor swap in reply to LittleMackinawFarmall, 07-05-2007 21:16:06  
The tractor needs to be split and then the engine can be lifted off the frame rails. The rear plate is between the side frames and the clutch housing and you have to remove the flywheel to get it off the block.



[Log in to Reply]  [No Email]
BDM

07-05-2007 23:45:01




Report to Moderator
 Re: 560 motor swap in reply to LittleMackinawFarmall, 07-05-2007 21:16:06  
If you haven't a clue, I suggest you purchase the service manuals from Binder Books. Telling you how to do this isn't going to happen in a short sentence. Not trying to be harsh, but you're dealing with heavy machinery. If done improperly, it can maim or kill you in a second.

Yes the tractor needs to be split at least to the motor plate. The front bolster needs to be removed.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy