Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Oil filler cap

Welcome Guest, Log in or Register
Author 
Kit Gage

07-02-2007 15:43:06




Report to Moderator

I "lost" the cap for my 300U and need to replace it. I looked for parts here and found the following:

Oil Fill Breather Cap, With Clip - 3-14in. tall (says 'OIL'). Fits: A, Super A, B, C, Super C, 200, 300. (Part No: R4458)

There is also one with no clip. What's the diff and what should I order? The one I lost was a pretty basic cap - not $32!

Any help is/will be appreciated. Thanks




[Log in to Reply]   [No Email]
John-Paul T

07-03-2007 12:18:00




Report to Moderator
 Re: Oil filler cap in reply to Kit Gage, 07-02-2007 15:43:06  
Well, thats a breather cap. The kind with a filter at top and lets crankcase breathe. Does yours have a sealed solid type cap or is it a filter type? Ours is solid cap with a seperate crank case breather tube which points down along opposite side of engine. If yours is like that too- I think thats the wrong cap for your setup.



[Log in to Reply]  [No Email]
Kit Gage

07-04-2007 04:37:32




Report to Moderator
 Re: Oil filler cap in reply to John-Paul T, 07-03-2007 12:18:00  
Thanks John-Paul,
Evidently a previous owner had put on the solid type. I do not ha ve a breather tube so I will look for a filter cap. Thanks, again.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy