Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Farmall B single front wheel axle

Welcome Guest, Log in or Register
Author 
John Barrick

02-14-2007 19:00:36




Report to Moderator

I need to know where to find a replacement front axle or the specifications to make one dimensions , proper grade of steel & what the hardness should be .

any help you can give me would be greatly appreciated. thanks!




[Log in to Reply]   [No Email]
J.J. from Afton

02-14-2007 19:17:55




Report to Moderator
 Re: Farmall B single front wheel axle in reply to John Barrick, 02-14-2007 19:00:36  
If you have the original axle you could always have a shop weld it up or do it yourself. I had to do the same thing last year with the axle shaft out of my single wheel F-12. I could not find any steel big enough or strong enough so i just welded one half of it up, let it cool and than turned it down on the lathe in our shop, than did the same with the other side.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy