TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Farmall B Carb

Welcome Guest, Log in or Register

Author

Mlsna

02-05-2007 20:15:42

Report to Moderator

I have a Marvel carb on my B. I was wondering if anyone had any ideas what to replace it with. The housing where the baffel is worn out and need to almost choke tractor completely to keep it running. Thanks

[Log in to Reply] [No Email]

Greg Miller

02-07-2007 10:14:41

Report to Moderator

Re: Farmall B Carb in reply to Mlsna, 02-05-2007 20:15:42

I know it is difficult to even think this....but...if you check with your local IH dealer, the Marvel-Schebler Gasoline carb is still available for roughly $300. I found that out while looking to replace the carb on my 1940 Farmall A

[Log in to Reply] [No Email]

Mlsna

02-06-2007 10:14:36

Report to Moderator

Re: Farmall B Carb in reply to Mlsna, 02-05-2007 20:15:42

Thanks for the help!

[Log in to Reply] [No Email]

Dave BN

02-05-2007 21:50:48

Report to Moderator

Re: Farmall B Carb in reply to Mlsna, 02-05-2007 20:15:42

Some carburetors can be rebuilt and some can not. Your local Case/IH dealer can tell you. You can buy new and/or rebuilt ones from several sources. I prefer Zenith carbs, but thats just me. Dave.

[Log in to Reply] [No Email]

Bob

02-05-2007 21:04:56

Report to Moderator

Re: Farmall B Carb in reply to Mlsna, 02-05-2007 20:15:42

Do you mean the throttle shaft and the bores (bushings?) it fits in are worn?

If that's all that's wrong, it should be repairable.

[Log in to Reply] [No Email]

Mlsna

02-05-2007 21:21:41

Report to Moderator

Re: Farmall B Carb in reply to Bob, 02-05-2007 21:04:56

Yeah, that seems to be the problem. Do they sell a kit for this kind of thing?

[Log in to Reply] [No Email]

City-Boy McCoy

02-06-2007 03:17:06

Report to Moderator

Re: Farmall B Carb in reply to Mlsna, 02-05-2007 21:21:41

Yes, they sell a kit for that. Get a good kit from your Case/IH dealer. (The cheaper kits sold elsewhere may not have the throttle bushings you need.) mike

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy