TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Torque Spec's

Welcome Guest, Log in or Register

Author

Rickers

01-26-2007 07:35:10

Report to Moderator

Would someone please provde the torque settings for the head and manifold nuts for a Farmall A, C113 engine. Thanks RJS

[Log in to Reply] [No Email]

Red Dave

01-26-2007 09:21:10

Report to Moderator

Re: Torque Spec's in reply to Rickers, 01-26-2007 07:35:10

Don't know about the manifold, but the original books called for 65 ft/lbs on the head, but later manuals call for 80 ft/lbs. I've been told that newer type head gaskets require more torque, but I'm not sure.

I make them 80 ft/lbs and haven't had any trouble with them.

Be sure to follow the tightening pattern in the manual when you torgue, and don't forget to re-torque the head and re-set the valve lash after warm-up

[Log in to Reply] [No Email]

Rickers

01-26-2007 10:29:02

Report to Moderator

Re: Torque Spec's in reply to Red Dave, 01-26-2007 09:21:10

Thanks

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy