Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Redoing steering on an H

Welcome Guest, Log in or Register
Author 
DH Illinois

01-24-2007 14:35:55




Report to Moderator

I wastrying to replace bushh-ings,seals, and bearings in a 1949 H bolster. the problem i ran into was the retainer for the felt washer on the lower end of the bolster would not go up the hole. I ordered the original part number and it fits the shaft fine, but was too big on the flat part to go up the hole. There is another one available for the earlier serial number than my tractor. I don"t know if i have the original bolster or if the part thru CNH is not manufactured correctly.

[Log in to Reply]   [No Email]
DH Illinois

01-27-2007 04:07:50




Report to Moderator
 Re: Redoing steering on an H in reply to DH Illinois, 01-24-2007 14:35:55  
I ordered another cup and the new one worked fine. The first one was manufactured incorrectly.



[Log in to Reply]  [No Email]
glennster

01-24-2007 15:09:37




Report to Moderator
 Re: Redoing steering on an H in reply to DH Illinois, 01-24-2007 14:35:55  
see if you can find a casting code on the bolster, you can determine the date of the bolster and see if its close to the year of the tractor. could be someone changed the front bolster. if it has a narrow front, you could snap them off in a ground hog hole or collapsed field tile. could also be the part you got was boxed wrong, wouldnt be the first time.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy