Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Farmall engine swap

Welcome Guest, Log in or Register
Author 
Mike Priar

01-24-2007 06:41:52




Report to Moderator

Guys,
Does the engine from a Super C fit in a B? I was told the only difference in the blocks was the bore. Thanks




[Log in to Reply]   [No Email]
gene bender

01-24-2007 10:29:22




Report to Moderator
 Re: Farmall engine swap in reply to Mike Priar, 01-24-2007 06:41:52  
yes no problem changing just put a plate over where the hy pump goes you can go either way on the water pump but you mite as well use it as sure wont hurt. Theres lots of them running around with and without the water pump.



[Log in to Reply]  [No Email]
Janicholson

01-24-2007 07:03:13




Report to Moderator
 Re: Farmall engine swap in reply to Mike Priar, 01-24-2007 06:41:52  
Yes. There are minor differences like a waterpump, but not a problem. The cooling system on the B might be a non-pressure system. It will still work, but watching the level will be important. The water pump will also require some changes in fan belt and mounts I believe. These are not show stoppers. Do not leave the pump off, the engine needs it due to differences in circulation in the SC block. JimN

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy