TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

1086 BRAKES

Welcome Guest, Log in or Register

Author

EMHOFF

01-21-2007 17:18:02

Report to Moderator

PURCHASED A 79 1086, TRACTOR IS IN PRETTY GOOD SHAPE. DON'T KNOW ALL OF THE IMPORTANT THINGS THAT ALL YOU GUYS WITH YEARS OF EXPERIENCE OUT THERE KNOW SO FIGURED I WOULD ASK. THE BRAKES WORK, BUT TAKE A LONG TIME TO TAKE HOLD ( IE. 50 FEET OR SO ) ANY SUGGESTIONS WHERE TO START? ALSO ANY SUGGESTIONS ON CHECKING THE T/A, DON'T WANT TO HURT IT WITH OUT KNOW I'M DOING SO.

THANKS

[Log in to Reply] [No Email]

RR mech

01-21-2007 20:17:26

Report to Moderator

Re: 1086 BRAKES in reply to EMHOFF, 01-21-2007 17:18:02

The brakes need took apart and new orings on the brake pistons. they get old and hard and let air in to the piston cavity. bleeding them will probably fix them only temporarily. Of course look at all the brake discs while you are in there. The orings are about a 99 % chance of fixing. The only other thing it can be is the orifice on the master cylinder inlet fitting.

[Log in to Reply] [No Email]

IaGary

01-21-2007 18:17:26

Report to Moderator

Re: 1086 BRAKES in reply to EMHOFF, 01-21-2007 17:18:02

I'd say your 1086 needs new brakes.

Its possible it has air in the system but more likely needs new brake discs.

There is a bleader on the top of the drum simular to a bleader on auto brakes.You can try bleading to see if this helps.

Gary

[Log in to Reply] [No Email]

emhoff

01-21-2007 19:51:56

Report to Moderator

Re: 1086 BRAKES in reply to IaGary, 01-21-2007 18:17:26

Gary, let me elaberate on this a little, when it stop the wheels lock-up. It is not like it just starts to slow you down to a stop.

Thanks, Emhoff

[Log in to Reply] [No Email]

IaGary

01-21-2007 20:11:31

Report to Moderator

Re: 1086 BRAKES in reply to emhoff, 01-21-2007 19:51:56

Yeah they will do that.

The disc are wore and have a lot of play in them because they are thin.

So when you push the brakes it takes awhile for it to get enough oil to compress every thing to stop it.

It locks up because you are steel on steel in the brake drums.

Once you stop it the first time after starting is it ok till it sets for awhile again?

By the way hold on to your hat when you price those brake disc.

Talk to a mechanic before installing yourself also. A couple of dos and don'ts to install.

Gary

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy