TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Push Pull Ignition Switch

Welcome Guest, Log in or Register

Author

Andy Motteberg

01-03-2007 15:54:06

Report to Moderator

Can my 2 prong push & pull ignition switch be used as a magneto "kill switch" if I wire one of the terminals to ground (metal on tractor)???

Thanks,
Andy Motteberg.

[Log in to Reply] [No Email]

Harold Hubbard

01-04-2007 04:51:31

Report to Moderator

Re: Push Pull Ignition Switch in reply to Andy Motteberg, 01-03-2007 15:54:06

Yes. BUT sooner or later somebody will will run the battery down trying to start it, because they either didn't know, or forgot, that the switch works backwards. Been there, done that, even worse because the one I have wired that way has no starter, and is parked on a hill most of the time.

[Log in to Reply] [No Email]

tn terry t

01-03-2007 18:48:44

Report to Moderator

Re: Push Pull Ignition Switch in reply to Andy Motteberg, 01-03-2007 15:54:06

why dont you get yourself a monentary push button switch

[Log in to Reply] [No Email]

Nebraska Kirk

01-03-2007 16:37:16

Report to Moderator

Re: Push Pull Ignition Switch in reply to Andy Motteberg, 01-03-2007 15:54:06

Absolutely! I did just that on my H.

[Log in to Reply] [No Email]

Janicholson

01-03-2007 15:59:20

Report to Moderator

Re: Push Pull Ignition Switch in reply to Andy Motteberg, 01-03-2007 15:54:06

Yes good thinking. The other must be to the mag to ground it (I knew you knew that) JimN

[Log in to Reply] [No Email]

Janicholson

01-03-2007 16:00:48

Report to Moderator

Re: Push Pull Ignition Switch in reply to Janicholson, 01-03-2007 15:59:20

And as Andy indicates backwards. JimN

[Log in to Reply] [No Email]

Paul G. in Mn

01-03-2007 15:57:54

Report to Moderator

Re: Push Pull Ignition Switch in reply to Andy Motteberg, 01-03-2007 15:54:06

Yes it will work but will be backwards as you will have to have it pushed in in the run possition and pull to kill.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy