Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

K5 Zenith F20 Float Purchase

Welcome Guest, Log in or Register
Author 
Dan Gruber

01-02-2007 14:10:08




Report to Moderator

Hi,

Need to replace my cracked F20 float. Does anyone have a reasonable source for them?

Thank you,

Dan




[Log in to Reply]   [No Email]
Janicholson

01-02-2007 15:16:09




Report to Moderator
 Re: K5 Zenith F20 Float Purchase in reply to Dan Gruber, 01-02-2007 14:10:08  
Clean out the fuel with a little heat, and solder the crack with lead free solder. There is a single dot of solder on one half that needs to be heated off first , then do the crack, then put the dab back on quickely with a nice clean hot iron. That allows pressure to equalizewhen doing the crack. JimN



[Log in to Reply]  [No Email]
Dan Gruber

01-04-2007 12:02:26




Report to Moderator
 Re: K5 Zenith F20 Float Purchase in reply to Janicholson, 01-02-2007 15:16:09  
Jim N.

Thank you for the tip. Crack is fixed. Waiting for my rebuild kit to arrive.

Dan



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy